PSM busbars

Model No. 7856.005

  Product Lifecycle  
Active
  • PSM busbars
  • PSM busbars
    Product details

    One or two infeeds, with on or three phases, redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system.

    + Also required

    + Product description

    Design: With 3 m connection cable (connector type CEE/EN 60 309)
    Product description: The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected.
    Benefits: Modules may be retrofitted whilst operational.
    Technical specifications: Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection.
    Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
    3-phase redundant infeed supported.
    The redundant circuit is completely separate from the 3 phases of the support rail.
    Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
    Material: Aluminium section, natural anodised
    Length of connection cable: 3 m
    Type of electrical connection: CEE
    Qty.: 1
    Phases per infeed: 3~
    Rated current (max.): 16 A
    Module slots (max.): 7
    To fit: Enclosure type: TS 8
    TS IT
    VX IT
    Height: 2,000 mm
    Operating temperature range: 5 °C...45 °C
    Ambient humidity (non-condensing): 5...95 %
    Storage temperature range: -20 °C...60 °C
    Packs of: 1 pc(s).
    Weight/pack: 5.1 kg
    Customs tariff number: 85369001
    EAN: 4028177579200
    ETIM 7.0: EC000215
    ECLASS 8.0: 27371306
    Product description: DK PSM busbar, 7-way, 3~, 16 A, Infeed: 1, For H: 2000 mm

    + Approvals

    Approvals:
    IEC CB : 
    EN
    VDE: 
    DE, EN
    Declerations:
    Declaration of conformity: 
    DE, EN

    + Downloads / CAD

    Data Sheets:
    Technical system catalogue: 
    DE EN
    Visio Shapes: 
    DE, EN
    Documentation:
    Instructions: 
    DE EN

    + Add accessories

    + Tender texts

    Power System Module busbar with fixed infeed 3x16 A
    The modular system allows basic equipment of each rack
    with a vertical busbar and three-phase infeed.
    The slots may be used over the entire enclosure
    height due to the vertical arrangement.
    Up to 7 socket modules may be snapped into the
    slots and thanks to the shock-hazard-protected design
    of the busbar it is not necessary to equip all slots
    with socket modules.
    Socket modules are available in various country
    versions, e.g. IEC 320 C13, earthing pin, F/B, CH,
    USA, UK. All modules may be mixed in the busbar. 7
    socket modules may be inserted per 2 m of bar. Up to
    42 C13 slots are available with IEC 320 modules.

    Installation via the plug & play system:

    The busbar may be installed in the FlexRack(i) without
    adaptor or may be retrofitted in all Rittal TS/ PS
    racks by means of the mounting kit DK 7856.011. Power
    is supplied via a 5-core, 3 m long cable with open end
    and wire end ferrules. The socket modules may be
    replaced and retrofitted whilst operational.

    Technical equipment:

    Three-phase construction with max. 3x16 A. Socket
    modules may be retrofitted whilst the system is
    operational. Each module optionally with / without
    integral miniature circuit-breaker.

    Technical specifications:

    Voltage range three-phase 110 V - 400 V AC 50/60 Hz
    Neutral connector is required
    Max. power supply 3x16 A
    Temperature application range: +5° to +45°
    Humidity application range: 5% to 95%
    rel. humidity, non-condensing
    Protection category IP20

    H-section made of aluminium

    W x H x D [mm]: 60 x 1908 x 60

    Make/model: Rittal type: Busbar Power System Module
    with fixed infeed DK 7856.005 or equivalent

     PSM busbars

    Model No.

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close