Swing frame, large, with trim panel for TS, VX SE 800 mm wide enclosures
Model No. 2337.235
Product Lifecycle
Active
Product details
For 800 mm wide enclosures, 22 - 45 U, with trim panel, for mounting 482.6 mm (19'') equipment.
More on the product
Create PDF of this page+ Also required
+ Product description
| Design: | 482.6 mm (19") level, side |
|---|---|
| Product description: | For mounting 482.6 mm (19˝) equipment. |
| Material: | Sheet steel |
| Surface finish: |
Frame: Zinc-plated Trim panel: Spray-finished |
| Colour: | RAL 7035 |
| Supply includes: |
Locking rod system with double-bit lock insert Material for attaching |
| Installation options: | In the TS/SE with 130° or 180° opening angle, depending on the chosen mounting kit |
| Assembly instruction: | Depending on the mounting situation, TS punched sections with mounting flanges 23 x 73 mm or 17 x 73 mm are required |
| Note: |
For further installation options, see "Technical details" For two-door enclosures TS, SE with a height of 1800 or 2200 mm the next-smallest swing frame must be installed, due to collision with the lock |
| To fit: |
Enclosure type: TS VX SE Width: = 800 mm Height: ≥ 1,800 mm |
| Units: | 36 U |
| To fit enclosure type: |
TS VX SE |
| Packs of: | 1 pc(s). |
| Weight/pack: | 20.8 kg |
| Customs tariff number: | 94039910 |
| EAN: | 4028177165168 |
| ETIM 7.0: | EC002620 |
| ECLASS 8.0: | 27189261 |
| Product description: | SR Swing frame, large, with trim panel, for TS, VX SE, for W: 800 mm, 36 U, installed at the side |
+ Add accessories
+ Tender texts
Large swing frame for network enclosure
36 U can be used for accommodating 482.6 mm (19") equipment.
Torsionally stiff frame, welded from rectangular tube and triple folded
support section. Load capacity up to 1500 N when standard hinges are
used. Distance from inside edge of door to front edge of swing frame 100
mm, may be installed deeper on a pitch pattern of 25 mm. The swing frame
must be fitted to the left / to the right depending on the installation
depth of the equipment. Installation position of equipment mounted to
the side.
Material: sheet steel
Surface finish: RAL 7035
for enclosure width: W: 800 mm
36 U can be used for accommodating 482.6 mm (19") equipment.
Torsionally stiff frame, welded from rectangular tube and triple folded
support section. Load capacity up to 1500 N when standard hinges are
used. Distance from inside edge of door to front edge of swing frame 100
mm, may be installed deeper on a pitch pattern of 25 mm. The swing frame
must be fitted to the left / to the right depending on the installation
depth of the equipment. Installation position of equipment mounted to
the side.
Material: sheet steel
Surface finish: RAL 7035
for enclosure width: W: 800 mm
