Product details
For shielding individual enclosure cells. Thanks to the symmetry of the frame system, the divider panel can also be used at the rear.
More on the product
Create PDF of this page+ Product description
| Product description: | For shielding individual enclosure cells. All-round, double fold for stability and to hold the seal. Thanks to the symmetry of the enclosure frame, divider panels may also be fitted at the rear, dimensions permitting. |
|---|---|
| Applications: | Notches in the corners and half-way up the sides permit the use of angular baying brackets and baying brackets, even with a divider panel fitted. |
| Material: | Sheet steel, 1.5 mm |
| Surface finish: | Zinc-plated |
| Supply includes: | Assembly parts |
| To fit: |
Enclosure type: TS 8 Height: = 1,800 mm Depth: = 400 mm |
| Installation options: |
For mounting on the outer mounting level This leaves the inner level free for further population |
| Assembly instruction: | The divider panel may also be fitted at the rear. This allows, e.g. frequency converters for heat dissipation to be installed in a divider panel with the cooling units facing outwards and protected/finished off with a cover. |
| IP protection category to IEC 60 529: | IP 54 |
| Packs of: | 1 pc(s). |
| Weight/pack: | 8.15 kg |
| Customs tariff number: | 94039910 |
| EAN: | 4028177208780 |
| ETIM 7.0: | EC002525 |
| ECLASS 8.0: | 27182102 |
| Product description: | TS Divider panel, for TS, for WD: 1800x400 mm |
+ Downloads / CAD
| Documentation: |
Instructions:
DE, EN
|
|---|
