Support Arm Systems

CP 180 Support Arm System

Load on a 1 m jib = 1800N. Vertical connection with command panels requires the use of connectors from support arm system CP 120.

CP 180 Support Arm System

Support section CP 180 Solid

Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section.

CP 180 Support Arm System

Support section CP 180 open

Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via...

CP 180 Support Arm System

Support section CP 120 Solid

Attached to the connection components with 4 self-tapping screws in the screw channel. May be cut to any length, no thread-tapping required. Closed cable duct with a large cross-section.

CP 180 Support Arm System

Support section CP 120 open

Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via...

CP 180 Support Arm System

Top-mounted joint CP 180 Horizontal outlet

For swivel mounting of the support arm system on a horizontal surface – also suitable for ceiling mounting. Removable cover for easy cable routing.

CP 180 Support Arm System

Wall/base mounting bracket CP 180, small

For rigid attachment of the support arm system to a vertical or horizontal surface.

CP 180 Support Arm System

Wall-mounted hinge CP 180 Horizontal outlet

For swivel mounting of the support arm on a vertical surface.

CP 180 Support Arm System

Coupling CP 180 for support arm connection Ø 130 mm

For swivel mounting the housing on the vertical section of the CP 180 support arm system.

CP 180 Support Arm System

Adaptor

Connection component between large and small support arm systems and for mounting small, flat command panels.

CP 180 Support Arm System

Angle piece 90° CP 180

For connecting horizontal and vertical support arm components. Removable covers for easy cable routing.

CP 180 Support Arm System

Intermediate hinge CP 180

For pivoted connection of horizontal support profiles within the support arm system.