- Article number:
- SK 3105.360
- Product description
- Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits.
- Material
- Aluminum, anodized
- Supply includes
- PTC heater
Quick-connection terminal
Fasteners - Note
- A thermostat is recommended for precise temperature control inside the enclosure
- In order to prevent condensation on assemblies, hygrostat is recommended to regulate heating
- In larger enclosures, even heat distribution is best achieved by installing several low-output heaters.
- Note on Model No.:
- An operating temperature of -40 °C is supported. Manufacturer's declaration available on request.
- Special voltages available on request. We reserve the right to make technical modifications.
- Continuous thermal output at 10 °C
- 86 W ‐ 100 W( 293 BTU/h ‐ 341 BTU/h )
- Rated operating voltage
- 110 V - 240 V, 1~, 50 Hz/60 Hz
- Dimensions
- Width: 90 mm
Height: 165 mm
Depth: 75 mm( Width: 3.54 ˝
Height: 6.5 ˝
Depth: 2.95 ˝ ) - Pre-fuse
- Miniature circuit-breaker/fuse: 4 A
- Protection category IP to IEC 60 529
- IP 20
- Protection category
- II (total insulation)
- Operating temperature range
- -33 °C...65 °C( -27 °F...149 °F )
- Packaging unit
- 1 pc(s).
- Weight/packaging unit
- 0.82 kg( 1.8 lb. )
- Customs tariff number
- 85162999
- EAN
- 4028177638662
- ETIM 7.0
- EC000737
- ECLASS 8.0
- 27180710
- Product description
- SK enclosure heater, without fan, 86-100 W, 110-240 V, 1~, 50/60 Hz, WHD: 90 x 165 x 75 mm
Enclosure Heater without fan
Article number: SK 3105.360
Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits. Version without fan. Continuous thermal output 10 – 150 W.