Base/plinth corner pieces with base/plinth trim panels, front and rear, 100 mm stainless steel for VX, TS, VX SE

Article number: VX 8620.053

Base/plinth corner pieces with molded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for best access to the screw-fastening point can be covered using bay and corner covers.

Article number:
VX 8620.053
Product description
Base/plinth corner pieces with molded self-positioning to the bayed enclosure system, for use with or without trim panels depending on the application. Large openings in the base/plinth corner piece for best access to the screw-fastening point can be covered using bay and corner covers.
Material
Base/plinth corner piece: Stainless steel 1.4301 (AISI 304)
Base/plinth trim panels, front/rear: Stainless steel 1.4301 (AISI 304)
Corner and baying covers: Plastic
Surface finish
Trim Panel: Brushed, grain 400
Supply includes
4 x base/plinth corner pieces
4 x corner covers
1 x baying cover
2 x base/plinth trim panels, front/rear, 100 mm high
Assembly components
Note
Base/plinth trim panels, on the side for closing off a base/plinth unit, for additional stabilization of the bases/plinths to one another, or for interior installation of the bases/plinths
Dimensions
Height: 100 mm
( Height: 3.94 ˝ )
Suitable for
Width: = 1,200 mm
( Width: = 47.2 ˝ )
Type rating according to UL 50E
Type 1, 3R, 4, 4X, 12
Weight/packaging unit
9.46 kg
( 20.9 lb. )
Packaging unit
2 pc(s).
Customs tariff number
94039910
EAN
4028177922327
ETIM 7.0
EC000721
ECLASS 8.0
27182003
Product description
VX Base/plinth corner piece, with base/plinth trim panel, front and rear, H: 100 mm, for W: 1200 mm, stainless steel, 1.4301
Approvals
UL + C-UL (listed)
UL + C-UL - FTTA
Documentation
Instructions
Data sheets
Technical details