Base/plinth trim panels, vented For VX base/plinth systems

Article number: VX 8620.090

For enclosure ventilation through the base/plinth. Specifically in applications such as power distribution where the enclosure gland plates are not used, this can be used to achieve a higher air throughput inside the enclosure. Various solutions to raise the roof and special roof plates with vent openings are also available for enclosure venting. With a 200 mm base/plinth height, one or two vented trim panels may optionally be used. Due to the complete symmetry of the VX base/plinth system, the vented trim panels can be mounted either at the front, at the back or at the side of the base/plinth corner piece.

Article number:
VX 8620.090
Product description
For enclosure ventilation through the base/plinth. Specifically in applications such as power distribution where the enclosure gland plates are not used, this can be used to achieve a higher air throughput inside the enclosure. Various solutions to raise the roof and special roof plates with vent openings are also available for enclosure venting. With a 200 mm base/plinth height, one or two vented trim panels may optionally be used. Due to the complete symmetry of the VX base/plinth system, the vented trim panels can be mounted either at the front, at the back or at the side of the base/plinth corner piece.
Material
Carbon steel
Color
RAL 9005
Supply includes
Assembly components
Dimensions
Height: 100 mm
( Height: 3.94 ˝ )
Suitable for
Enclosure type: VX
TX CableNet
Suitable for width/depth: 600 mm
( Enclosure type: VX
TX CableNet
Suitable for width/depth: 23.6 ˝ )
Type rating according to UL 50E
Type 1, 12
Weight/packaging unit
1.3 kg
( 2.9 lb. )
Packaging unit
2 pc(s).
Customs tariff number
94039910
EAN
4028177922433
ETIM 7.0
EC000721
ECLASS 8.0
27182003
Product description
VX Base/plinth trim panel, vented, for W/D: 600 mm, sheet steel
Approvals
UL + C-UL (listed)
UL + C-UL - FTTA