System Window for VX, TS, SE
Model No. FT 2735.540
To cover display and operating instruments or cut-outs, and provide protection from dirt and moisture as well as unauthorized access.
+ Product description
Utilized to cover display and operating instruments or cut-outs, and provide protection from dirt and moisture as well as unauthorized access.
Base frame: Easily screw-fastened to the door thanks to modified dimensions (tubular door frame may be used as a drilling template).
Base frame: Readily height-adjustable.
Base frame: Stabilizes the door cut-out.
Base frame: Conceals the cut edge.
Base frame: There is no dirt on the seal, the glass is protected from being lifted out, dirt cannot drop inside, and moisture cannot run behind the window when opening.
Base frame: Frame section height 30 mm or 60 mm
Viewing window: Made from single-pane safety glass: high level of resistance to solvents and scratches, anti-static, reduced risk of injury if broken.
Viewing window: Standard double-bit lock insert may be exchanged for lock inserts 27 mm, type A, and/or for lock system Ergoform-S (except H = 270 mm).
Viewing window: Hinge with 180° opening angle, easily inserted.
Extruded aluminum section with die-cast zinc corner pieces and single-pane safety glass.
Base frame: Powder coated on the outside in RAL 7035,
Hinge and lock section: Natural-anodized
|Protection category IP to IEC 60 529:||
Standard double-bit lock insert may be exchanged for lock inserts 27 mm, type A, and/or for lock system Ergoform-S (except H = 270 mm).
Enclosure type: VX
Enclosure type: TS
Enclosure type: SE
Width: 600 mm (24 ")
Height: 670 mm (26 ")
Width: 500 mm (20 ")
Depth: 47 mm (1.9 ")
Height: 598 mm (24 ")
Width: 363 mm (14 ")
|Build depth for components (max.):||
33 mm (1.3 ")
5.8 kg (12.8 lb.)
|Customs tariff number:||
FT System window, for TS, SE, 30 section, WHD: 500x670x47 mm, for W: 600 mm
+ Add accessories
– Customers who were interested in this item were also interested in
Partial Mounting Plates for TS, SE
Model No.8614.040Section for cable entry, center for TS, SE, CM, TP
Model No.8802.160System Window for VX, TS, SE
Model No.2736.500TS System Chassis 23 x 73 mm
Model No.8612.520Roof plate for cable entry, two-piece for VX, VX IT, TS, TS IT
Model No.7826.865Stepped Collar For wall thicknesses from 1.5 to 4.5 mm
Model No.2899.250Pivoting frame, large, with trim panel for TS, SE, 800 mm wide enclosures
Model No.2347.235Swing frame, small for TS, SE, 600 mm and 800 mm wide enclosures
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.