Ri4Power Transport units and weights Details may be found in the TS 8 load brochure (available to download at www.rittal.com). Transportation by crane Transport plinth for TS SO 1228.XXX All TS 8 enclosures are suitable for crane transportation, either as For the transportation of free-standing enclosures or bayed heavy, bayed enclosure suites. suites. Available in 200 mm increments from Eyebolt PS 4568.000 2 to 5 m. Transport plinths may be supplied For crane transportation of the with two welded tubes enclosures if not already included at right-angles to with the supply (based on DIN 580). accommodate transport bars. Variable punch- ings to suit all enclosure Combination angle PS 4540.000 widths from 600 mm. For optimum distribution of tensile forces during transportation of bayed enclosures by crane. ) Cable pull angle 1 Individual enclosures may be safely transported using the 1 2 eyebolts included with the supply. For symmetrical loads, the following maximum permissible overall loads apply: for 45° cable pull angle 4800 N, for 60° cable pull angle 6400 N, for 90° cable pull angle 13600 N. 2 For the enclosure combination with angular baying brackets, quick-fit baying clamps and combination angles shown here, the load capacity with a cable pull angle of 60° is as follows: F1 = 7000 N, F2 = 7000 N. For the enclosure combination with angular baying brackets, quick-fit baying clamps and combination angles shown here, the load capacity with a cable pull angle of 60° is as follows: F1 = 7000 N, F2 = 14000 N, F3 = 7000 N. Rittal Technical System Catalogue/Power distribution 66
Technical System Catalogue Ri4Power
To see the actual publication please follow the link above