Support arm systems

Support arm system CP 180

Load with 1 m jib = 1800 N. Vertical connection with command panels requires the use of connectors from support arm system CP 120.

Support arm system CP 180

Support section CP 180 Solid

Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section.

Support arm system CP 180

Support section CP 180 Open

Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via...

Support arm system CP 180

Support section CP 120 Solid

Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section.

Support arm system CP 180

Support section CP 120 Open

Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via...

Support arm system CP 180

Top-mounted joint CP 180 Horizontal outlet

For swivel mounting of the support arm system on horizontal surfaces – also suitable for suspending from the ceiling. Removable cover for simple cable entry.

Support arm system CP 180

Wall/base mounting bracket CP 180, small

For rigid attachment of the support arm system to vertical or horizontal surfaces.

Support arm system CP 180

Wall-mounted hinge CP 180 Horizontal outlet

For swivel mounting of the support arm on vertical surfaces.

Support arm system CP 180

Coupling CP 180 for support arm connection Ø 130 mm

For swivel mounting the enclosure on the vertical section of the support arm system CP 180.

Support arm system CP 180

Adaptor

Connection component between large and small support arm systems as well as for external mounting of small, slimline operating housings

Support arm system CP 180

Angle piece 90° CP 180

For connecting horizontal and vertical support arm components. Removable covers for simple cable entry.

Support arm system CP 180

Intermediate hinge CP 180

For vertically hinged connection of horizontal support sections within the support arm system.