Compact system enclosures CM

Article number: CM 5110.500

Enclosure with door of sheet steel, with mounting plate and open base to accommodate base plates. Protection category IP 55. A symbiosis of the enclosure benefits of Rittal compact enclosures, and the configuration diversity of the TS 8 baying enclosure system. Perforated mounting strips in the door for fast attachment of support strips, cable conduit holders and covers.

Cover plate for TP

Cable clamp rail C-section, for mounting plates, for VX, TS, VX SE, TP

Rail for interior installation for TP, compact enclosures HD

Rail for interior installation for TP, compact enclosures HD

TS punched section with mounting flange, 17 x 73 mm

Wiring plan pocket of sheet steel for VX, TS, VX SE, PC, TP pedestal

Base configuration rail for TP

Support strip for VX, TS, VX SE, TP, AX

TS punched section with mounting flange, 17 x 73 mm

Article number:
CM 5110.500
Material
Enclosure: Sheet steel 1.5 mm
Door: Sheet steel, 2.0 mm, all-round foamed-in PU seal
Mounting plate: Sheet steel, 3.0 mm
Surface finish
Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint
Mounting plate: Zinc-plated
Colour
RAL 7035
Supply includes
Enclosure with hinged door(s)
3-point lock system with double-bit insert
Mounting plate
Open base for individual cable entry
Protection category NEMA
NEMA 12 with selection of the appropriate gland plates or trim panel
Protection category to IEC 60 529
IP 55 with selection of the appropriate gland plates or trim panel
IK Code
IK08
Dimensions
Width: 600 mm
Height: 800 mm
Depth: 400 mm
Dimensions mounting plate (W x H)
540 mm x 755 mm
Number of doors
1
Interchangeable door hinge
Yes
Basic material
Sheet steel
Packs of
1 pc(s).
Weight/pack
39 kg
Customs tariff number
94032080
EAN
4028177479685
ETIM 7.0
EC000261
ECLASS 8.0
27180101
Product description
CM Compact system enclosure, WHD: 600x800x400 mm, Sheet steel, with mounting plate, single-door, open base
Approvals
UL + C-UL (listed)
Declarations
Declaration of conformity
Declaration of conformity UK
Compact enclosure
Description of enclosure body:
Sturdy sheet steel construction consisting of 1.5 mm
sheet steel, folded and welded from a single piece,
with all-round protection channel on the door
aperture. Rear with recessed holes for wall brackets.
Steel is cleaned, nanoceramically pretreated,
degreased, phosphated, electrophoretic dipcoat primed
and polyester powder-coated with textured RAL 7035.
Base prepared for accommodating gland plates for
optimum cable entry. Door/s made from 2 mm sheet
steel, with foamed-in seal and spot-welded mounting
strips on both sides for individual configuration.
R/h door hinge with single-door enclosures, may be
swapped to opposite side, 130° opening angle (can be
retrofitted to 180°) with locking rod.
Description of interior installation:
Mounting plate made from 3 mm sheet steel may be
mounted in the rearmost position using system
punchings. Mounting plate slide block for easy
installation and clip fastening in the upper area for
secure and easy attachment.
Studs which are spot-welded on the enclosure body from
the inside in the side, roof and base area are used to
prepare for interior installation with the suitable
rail system.
Description of cable entry:
Variable gland plate combination is possible for
optimum cable entry in enclosures, with automatic
potential equalisation thanks to gland plate
attachment.

Dimensions (W/H/D): 600 x 800 x 400 mm
Number of doors: 1
Approvals: UL / CSA / TÜV /
Lloyds Register of Shipping
Protection category: IP 55 to EN 60 529,
complies with NEMA 12
with selection of the appropriate gland plates
Colour: RAL 7035
Model No.: 5110.500
Manufacturer: Rittal GmbH & Co. KG