This item will be discontinued on: Oct 31, 2021
Alternative product recommendation:
5302035
- Article number:
- DK 5501.480
- Benefits
- Tool-free, time-saving one-man assembly from the enclosure front
- All three mounting holes in the EIA system punchings are available for screw-fastening the equipment.
- Alternatively, direct screw fastening in the TE 8000 to the 482.6 mm (19") system punchings is also possible
- Applications
- For mounting on the front mounting level
- To support heavy installed equipment
- To adapt to individual distances between 482.6 mm (19") levels
- Material
- Sheet steel
- Surface finish
- Zinc-plated
- Supply includes
- Assembly parts
- Installation options
- 482.6 mm (19") L mounting angles, front and rear
- 482.6 mm (19") mounting frames front and rear
- 482.6 mm (19") mounting angles, standard in the VX IT
- Load capacity
- 1500 N
- Note
- Effective contact surface 25 mm per side
- To fit
- Enclosure type: TS IT
VX IT
TE
TX CableNet - Distance between levels
- 600 ‐ 900 mm
- Packs of
- 2 pc(s).
- Weight/pack
- 3.75 kg
- Customs tariff number
- 73269098
- EAN
- 4028177679030
- ETIM 7.0
- EC002620
- ECLASS 8.0
- 27189261
- Product description
- DK Slide rail, support surface Width: 25 mm, depth-variable, 150 kg, For two 482.6 mm (19") attachment level (front+rear), distance between levels:: 600-900 mm
- Documentation
- Instructions
482.6 mm (19") - slide rails, depth-variable
Depth-variable slide rails for L-shaped mounting
angles and similar shapes of mounting angles.
For mounting between a pair of mounting angles
and to support heavy installed equipment.
Distance between 482.6 mm (19") levels from
600-900 mm, load capacity 150 kg.
The slide rails have vent holes across the entire
depth to support the climate control of integral
components.
Tool-free, time saving one-man assembly from the
enclosure front.
Locate, pull-out, snap into position.
All three mounting holes in the 482.6 mm (19") system
punchings are available for screw-fastening the
equipment.
Material: Sheet steel
Surface finish: Zinc-plated
Model No DK: 5501.480
Manufacturer: Rittal
Depth-variable slide rails for L-shaped mounting
angles and similar shapes of mounting angles.
For mounting between a pair of mounting angles
and to support heavy installed equipment.
Distance between 482.6 mm (19") levels from
600-900 mm, load capacity 150 kg.
The slide rails have vent holes across the entire
depth to support the climate control of integral
components.
Tool-free, time saving one-man assembly from the
enclosure front.
Locate, pull-out, snap into position.
All three mounting holes in the 482.6 mm (19") system
punchings are available for screw-fastening the
equipment.
Material: Sheet steel
Surface finish: Zinc-plated
Model No DK: 5501.480
Manufacturer: Rittal