This item will be discontinued on: Jan 15, 2019
This item is being replaced by:
8451000
- Article number:
- TS 8451.600
- Material
- Enclosure frame: Stainless steel 1.4301 (AISI 304), 1.5 mm
Roof: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed
Door: Stainless steel 1.4301 (AISI 304), 2.0 mm, exterior brushed
Rear panel: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed
Gland plates: Stainless steel 1.4301 (AISI 304), 1.5 mm
Mounting plate: Sheet steel, 3.0 mm - Surface finish
- Enclosure frame and gland plates: Uncoated
Door, roof and rear panel: Exterior brushed, grain size 400
Mounting plate: Zinc-plated - Supply includes
- Enclosure frame
Door(s)
R/h door hinge with single-door enclosures, may be swapped to opposite side
Roof plate
Gland plates
Rear panel
Mounting plate
4 eyebolts
Lock: 3 mm double-bit
2 TS punched rails 18 x 38 mm
2 support strips fitted in the enclosure depth - 2 supportstrips in depth
- Yes
- Number of doors
- 2
- IP protection category to IEC 60 529
- IP 55
- Type rating to UL 50E
- Type 1, 12
- Protection category NEMA
- NEMA 1, 12
- IK Code
- IK09
- Note
- Due to the hardness of the material, we recommend using metal multi-tooth screws for the interior installation.
- Basic material
- Stainless steel
- Dimensions
- Width: 1,200 mm
Height: 2,000 mm
Depth: 600 mm - Dimensions mounting plate (W x H)
- 1,099 mm x 1,896 mm
- Packs of
- 1 pc(s).
- Weight/pack
- 194.7 kg
- EAN
- 4028177300781
- ETIM 7.0
- EC000261
- ECLASS 8.0
- 27180101
- Product description
- TS Bayed enclosure system, WHD: 1200x2000x600 mm, Stainless steel 1.4301, with mounting plate, two doors at the front
- Documentation
- Further information
- Instructions
- Load brochure
- Protective conductor brochure
- Safety instructions
- White Paper
- Data sheets
- Technical details
- Technical system catalogue
Enclosure (baying system), two-door, stainless steel
Enclosure:
Stable symmetrical extruded frame construction,
consisting of welded hollow section with
25 mm DIN pitch pattern of holes. All sections
have chamfered edges. Horizontal sections with
additional channel above the seal. Vertical sections
with two pairs of mounting angles for space-saving
interior installation.
Bayable on all sides. Four eyebolts,
gland plate, 3-part, removable and
replaceable, fitted.
Door:
with foamed-in seal, with removable
rectangular frame with holes
on a 25 mm DIN pitch pattern, lockable door with
right-hand hinge, locking bar with 4-point latching,
double-bit insert to DIN 43668.
Adjacent door additionally latched with swing lever
at the top and bottom. Hinges and captive
hinge pins, door opening angle 130° to VDI.
Rear panel and roof plate:
with foamed-in seal, removable
Mounting plate:
C-folds at the side,
depth-adjustable on a 25 pitch pattern
via integrated plastic slide pieces.
All screw-fastened panels have automatic
potential equalisation and are prepared for attachment
of earthing straps.
Accessories:
Side panels with foamed-in seal and
screws to close the side.
Protection category: IP 55 to EN 60 60529, complies
with NEMA 12
Material:
Enclosure frame, roof, rear panel and gland plates:
Stainless steel 1.4301 (AISI 304), 1.5 mm
Door(s): Stainless steel 1.4301 (AISI 304), 2.0 mm
Mounting plate: Sheet steel, 3.0 mm
Surface finish:
Enclosure frame and gland plates: Uncoated
Door(s), roof and rear panel: Brushed on the outside,
grain size 400
Mounting plate: Zinc-plated
Dimensions (W x H x D): 1200x2000x600 mm
Enclosure:
Stable symmetrical extruded frame construction,
consisting of welded hollow section with
25 mm DIN pitch pattern of holes. All sections
have chamfered edges. Horizontal sections with
additional channel above the seal. Vertical sections
with two pairs of mounting angles for space-saving
interior installation.
Bayable on all sides. Four eyebolts,
gland plate, 3-part, removable and
replaceable, fitted.
Door:
with foamed-in seal, with removable
rectangular frame with holes
on a 25 mm DIN pitch pattern, lockable door with
right-hand hinge, locking bar with 4-point latching,
double-bit insert to DIN 43668.
Adjacent door additionally latched with swing lever
at the top and bottom. Hinges and captive
hinge pins, door opening angle 130° to VDI.
Rear panel and roof plate:
with foamed-in seal, removable
Mounting plate:
C-folds at the side,
depth-adjustable on a 25 pitch pattern
via integrated plastic slide pieces.
All screw-fastened panels have automatic
potential equalisation and are prepared for attachment
of earthing straps.
Accessories:
Side panels with foamed-in seal and
screws to close the side.
Protection category: IP 55 to EN 60 60529, complies
with NEMA 12
Material:
Enclosure frame, roof, rear panel and gland plates:
Stainless steel 1.4301 (AISI 304), 1.5 mm
Door(s): Stainless steel 1.4301 (AISI 304), 2.0 mm
Mounting plate: Sheet steel, 3.0 mm
Surface finish:
Enclosure frame and gland plates: Uncoated
Door(s), roof and rear panel: Brushed on the outside,
grain size 400
Mounting plate: Zinc-plated
Dimensions (W x H x D): 1200x2000x600 mm