Liquid Cooling Package LCP Inline DX, LCP Inline DX/FC

Model No. SK 3311.390

  Product Lifecycle  
  • Liquid Cooling Package LCP Inline DX, LCP Inline DX/FC

    Discontinued article.


    Product description Spare parts

    Ideal for cooling of small and medium-sized IT applications.

    The product was added to your wishlist

    Model No.:


    No. of packs*

    Add to wishlist

    * Pack of sale = 1 pc(s).

    + Also required

    + Product description

    Benefits: Maximum energy efficiency due to EC fan technology and IT-based control
    Minimal pressure loss at the air end, which in turn minimises the power consumption of the fans
    Temperature monitoring and control
    With redundant temperature sensor integrated at the air end as standard
    Thanks to the speed-regulated compressor, the cooling output is ideally adapted to actual requirements
    Specific maintenance of the LCP DX due to separation of cooling and server racks
    Using LCP DX/FC variants in combination with indirect free cooling helps to save operating costs
    Applications: Ideal for IT cooling of small and medium-sized locations
    One or two racks can be cooled separately
    Function principle: The LCP is designed for siting within a bayed enclosure suite. Hot air is drawn in from the aisle at the rear of the device, cooled by the high-capacity compact impellers, and blown back into the room or cold aisle after cooling.
    The LCP DX/FC variants include both a refrigerant and a water/glycol heat exchanger. There is an additional free cooler integrated into the external condenser.
    Absorbed thermal energy is emitted to the ambient air at the external condenser location, without heating up the installation room
    IT monitoring: Direct connection of the unit via SNMP over Ethernet
    Integration into RiZone
    Material: Sheet steel, spray-finished
    Colour: RAL 7035
    Protection category IP to IEC 60 529: IP 20
    Note: Variant with UL approval available on request
    Options: Humidifier
    Dehumidification and reheater
    Condensate drain pump
    Higher cooling output
    Air filter
    Low-temperature/high-temperature condenser (-40 °C/+53 °C)
    Variant: Suite cooling
    Total cooling output to DIN EN 14511: L 30 L 22: 20 kW
    Modulation range: Device modulates without interruption in the cooling output range between: 6 kW - 20 kW
    Total cooling output/Number of fan modules: 20 kW / 4 
    Total cooling output: 20 kW
    Air throughput (unimpeded air flow): At 50 Hz: 4800 m³/h
    Rated operating voltage: 400 V, 3~, 50 Hz
    380 V - 480 V, 3~, 60 Hz
    Dimensions: Width: 300 mm
    Height: 2000 mm
    Depth: 1200 mm
    Temperature control: Linear fan control
    Inverter-controlled compressor
    To fit: TS IT
    Installation in bayed enclosure suite: Flush
    Temperature range: Operation (environment): +15 °C...+35 °C
    Refrigerant/cooling medium: Refrigerant: R410a
    Cooling medium: Refrigerant
    Type of electrical connection: Connection clamp
    Duty cycle: 100 %
    Rated current max.: At 50 Hz: 12.4 A
    Miniature circuit-breaker/fuse: 32 A
    Noise level: At 50 Hz: 69 dB(A)
    Design: LCP Inline DX
    EC fan: yes
    Fans may be exchanged with the system operational: yes
    eCl@ss 8.0/8.1: 27180712
    Packs of: 1 pc(s).
    Weight/pack: 201 kg
    EAN: 4028177918030
    Customs tariff number: 84158300
    ETIM 7.0: EC002515
    ETIM 6.0: EC002515
    eCl@ss 8.0/8.1: 27180712
    eCl@ss 6.0/6.1: 27180712
    Product description: LCP Inline DX, 20kW, WHD: 300x2000x1200 mm

    + Approvals

    Declaration of conformity: 
    (EN, DE)

    + Downloads

    Data sheets:
    Safety data sheet: 
    DE   EN  

    + Spare parts


     Liquid Cooling Package LCP Inline DX, LCP Inline DX/FC

    Model No. SK 3311.390

    [X] Close



    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree