Baying systems TS 8

Article number: TS 8405.510

The TS 8 sheet steel baying system, with its symmetrical profile in the width and depth, offers a significant space gain, plus simple interior installation. This likewise ensures bayability from all sides. Additionally, the integral, automatic potential equalisation of all enclosure panels and the triple surface treatment ensure optimum safety.

LED system light

Side panel, screw-fastened, sheet steel for TS, TS IT

Divider panel for TS

Divider panel for module plates for TS

Levelling feet for VX, VX IT, TS, TS IT, VX SE, PC, IW, Blue e+ chillers

Cable clamp rail Mounting angle for TS, PC, TP universal console, TS base/plinths

Ride-up roller for TS, VX SE, PC

Base/plinth trim panels, side, 100 mm for base/plinth system VX, sheet steel

Base/plinth trim panels, side, 200 mm for base/plinth system VX, sheet steel

Base/plinth corner piece with base/plinth trim panels, front and rear, 100 mm for VX, VX IT, VX SE, TE, TS, TS IT, TP, PC, IW

Base/plinth corner piece with base/plinth trim panels, front and rear, 200 mm for VX, VX IT, VX SE, TE, TS, TS IT, TP, PC, IW

Base/plinth corner pieces with base/plinth trim panels, front and rear New version

Base/plinth corner pieces with base/plinth trim panels, front and rear New version

Base/plinth trim panels, side for base/plinth system VX, sheet steel, new version

Base/plinth trim panels, side for base/plinth system VX, sheet steel, new version

Article number:
TS 8405.510
Material
Enclosure frame: Sheet steel, 1.5 mm
Roof: Sheet steel, 1.5 mm
Door: Sheet steel, 2.0 mm
Rear panel: Sheet steel, 1.5 mm
Surface finish
Enclosure frame: Dipcoat-primed
Door, roof and rear panel: Dipcoat-primed, powder-coated on the outside, textured paint
Colour
RAL 7035
Supply includes
Enclosure frame
Door(s)
R/h door hinge with single-door enclosures, may be swapped to opposite side
Roof plate
Rear panel
4 eyebolts
Lock: 3 mm double-bit
Dimensions
Width: 400 mm
Height: 2,000 mm
Depth: 500 mm
Protection category to IEC 60 529
IP 55 in conjunction with side panels and gland plates
Protection category NEMA
NEMA 12 in conjunction with side panels and gland plates
Type rating to UL 50E
Type 1, 12
IK Code
IK09
Number of doors
1
Basic material
Sheet steel
Packs of
1 pc(s).
Weight/pack
60.7 kg
EAN
4028177357266
ETIM 7.0
EC000261
ECLASS 8.0
27180101
Product description
TS Bayed enclosure system, WHD: 400x2000x500 mm, Sheet steel, without mounting plate, single door at the front
Approvals
Bureau Veritas
Lloyds Register of Shipping
UL + C-UL (listed)
Certificates
Surface finish
Declarations
Declaration of conformity
Declaration of conformity UK
Manufacturer's declaration
Enclosure (baying system) single-door
Enclosure:
Symmetrical frame construction of rolled hollow
sections with holes on a 25 mm DIN pitch pattern.
All sections have chamfered edges.
The horizontal sections have an additional
protection lip above the seal.
The vertical sections have two mounting levels
for space-saving interior installation.
Bayable on all sides.
Four eyebolts, fitted.

Door:
with foamed-in seal, 4-point latch locking rod,
double-bit insert to DIN 43668, door hinge
may be swapped from right to left,
with captive hinge pins, door opening angle 130°
to VDI, can be retrofitted to 180


Rear panel and roof plate:
With foamed-in seal, removable

All screw-fastened cover parts with automatic potential
equalisation and prepared for the attachment of
earthing straps.

Accessories:
Side panels with foamed-in seal and assembly screws for
finishing off the sides.

Protection category: IP 55

Material:
1.5 mm sheet steel

Surface finish:
Electrophoretic dipcoat-primed
Outside surfaces powder-coated in textured RAL 7035

Dimensions (W x H x D): 400 x 2000 x 500 mm