+ Product description
| Design: | non-switchable |
|---|---|
| Product description: | The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. The various modules, earthing pins, IEC320 etc. may be inserted into the support rail in any combination. This is easily achieved, even by non-electricians, thanks to the shock hazard protected plug & play system. |
| Material: |
Section: Aluminium, anodised Socket inserts: Plastic (PA6 GF 30 V1) |
| Length: | 250 mm |
| Type of electrical connection: | WAGO WINSTA MIDI |
| Phases per infeed: | 1~ |
| Thermal overcurrent protection: | per socket module |
| Required number of module slots: | 1 |
| Dimensions: | Length: 250 mm |
| Sockets: | 4 x D, earthing-pin (type F, CEE 7/4) |
| Packs of: | 1 pc(s). |
| Weight/pack: | 0.355 kg |
| Customs tariff number: | 85369001 |
| EAN: | 4028177402546 |
| ETIM 7.0: | EC000330 |
| ECLASS 8.0: | 27142604 |
| Product description: | DK PSM Plus socket module, CEE 7/3 (type F), 4-way, black, non-switchable, with thermal overcurrent protection |
+ Approvals
| Approvals: | |
|---|---|
| Certificates: |
EAC:
RU
|
| Declerations: |
Declaration of conformity:
DE, EN
|
+ Downloads / CAD
| Data Sheets: |
|---|
+ Tender texts
Power System Module plug-in module, 4 x earthing-pins
(CEE 7/3) with thermal overload protection (16 A)
Installation via the plug & play system:
The plug-in module is locked into the power system
module busbar. It can be locked in or unlocked whilst
working. The module connection direction determines
which power supply will be used.
A mixture of all of the modules can be fitted in the
rails.
Technical fittings:
The plug-in module has 4 sockets available for use. The
module has an integrated thermal fuse (16 A). It
protects all 4 sockets. The automatic circuit breaker
can be reset for switching back on if it trips out.
Technical specifications:
Single-phase voltage range: 110 V - 230V AC 50/60 Hz,
neutral conductor is required
Max. current per module: 16A at 230 V AC
Overload protection: Thermal fuse, Trimax 16 A
Temperature application range: +5°C - +45°C
Humidity range: 5% - 95% relative humidity,
non-condensing
Protection category IP 20
W x H x D [mm]: 50 x 250 x 45
(CEE 7/3) with thermal overload protection (16 A)
Installation via the plug & play system:
The plug-in module is locked into the power system
module busbar. It can be locked in or unlocked whilst
working. The module connection direction determines
which power supply will be used.
A mixture of all of the modules can be fitted in the
rails.
Technical fittings:
The plug-in module has 4 sockets available for use. The
module has an integrated thermal fuse (16 A). It
protects all 4 sockets. The automatic circuit breaker
can be reset for switching back on if it trips out.
Technical specifications:
Single-phase voltage range: 110 V - 230V AC 50/60 Hz,
neutral conductor is required
Max. current per module: 16A at 230 V AC
Overload protection: Thermal fuse, Trimax 16 A
Temperature application range: +5°C - +45°C
Humidity range: 5% - 95% relative humidity,
non-condensing
Protection category IP 20
W x H x D [mm]: 50 x 250 x 45
