Filter technology

  • Filter mat for Blue e+ chillers (inverter housings)
    Filter mat for Blue e+ chillers (inverter housings)

    In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

    More

  • Filter mat for tangential fans
    Filter mat for tangential fans

    In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

    More

  • Filter mat for cooling units, air/air heat exchangers and chillers
    Filter mat for cooling units, air/air heat exchangers and chillers

    In dusty environments, we recommend the use of filter mats. This makes the units easier to clean. The filter will need to be replaced at regular intervals, depending on the level of contamination.

    More

  • Metal filter
    Metal filter

    We recommend the use of washable metal filters, particularly in environments with dusty or oily ambient air. If air or steam condenses on the metal surfaces, any particles that may be present will adhere to the metal and are easily washed out with water or grease-dissolving detergents.

    More

  • Spare filter mat
    Spare filter mat

    For the stocking of filter mats for roof-mounted fans, fan-and-filter units and thermoelectric coolers in larger packet sizes.

    More

  • Fine filter mat for fan-and-filter units
    Fine filter mat for fan-and-filter units

    Combined with the standard filter and the additional fine filter mat, this achieves a higher protection category.

    More

  • Outlet filter Standard
    Outlet filter Standard

    For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

    More

  • Outlet filter
  • Outlet filter EMC
    Outlet filter EMC

    For ventilation by convection, an outlet filter can be fitted in both the upper and lower sections of the enclosure.

    More

  • Hose-proof hood to increase the protection category
    Hose-proof hood to increase the protection category

    Particularly for applications in the food industry, the hose-proof hood prevents the ingress of damp. The protection category IP 56 is achieved in conjunction with a standard filter.

    More

  • Blanking cover for fan-and-filter units / outlet filters
    Blanking cover for fan-and-filter units / outlet filters

    If you need to close existing mounting cut-outs for fan-and-filter units/outlet filters in order to achieve a higher protection category, a blanking cover may be used in the fan-and-filter unit / outlet filter instead of the filter mat, without the need for welding or other metal machining.

    More

  • Front outlet grille 2 U for tangential fans
    Front outlet grille 2 U for tangential fans

    Front outlet grille 2 U for tangential fans to expel the hot air to the outside from the upper section of the enclosure. Two grilles may be used for natural convection.

    More

  • Filter holder for roof ventilation
    Filter holder for roof ventilation

    A filter mat must be used to increase the protection category of the roof ventilation SK 3148.007.

    More

  • Enclosure internal fan
    Enclosure internal fan

    To prevent hot-spots inside the enclosure and support the air routing of active enclosure climate control components.

    More

  • Mini fan
    Mini fan

    Compact DC fan for enclosure and component cooling in enclosures.

    More

  • Integrated louvres
    Integrated louvres

    For ventilation by convection; easily retro-fitted using 4 screws.

    More

+
[X] Close

Required