Base/plinth trim panels with brush strip for base/plinth system VX
Model No. VX 8620.093
- Product description
The 100 mm high base/plinth trim panels are used in the width or depth for cable entry into the base/plinth. The trim panels may also be used in a 200 mm high base/plinth and combined with other 100 mm high trim panels.
More on the productCreate PDF of this page
+ Product description
For cable entry in the base/plinth. With a base/plinth height of 200 mm, one or two trim panels with brush strips may optionally be used. Thanks to the complete symmetry of the base/plinth system VX, the trim panels with brush strip may either be fitted at the front, rear or side on the base/plinth corner piece.
Base/plinth trims: Sheet steel
Brush strip: Plastic, self-extinguishing
Width/depth: 800 mm
Height: 100 mm
|Customs tariff number:||
VX Base/plinth trim panel, with brush strip, for W/D: 800 mm
– Customers who were interested in this item were also interested in
Base/plinth trim panels, vented for base/plinth system VX
Model No.8620.090Base/plinth adaptor for twin castors and levelling feet
Model No.8100.770Base/plinth trim panels with brush strip for base/plinth system VX
Model No.8620.092Baying enclosure system VX25 Basic enclosure with glazed door
Model No.8840.110Slide rail, 1 U, depth-variable for VX IT, TE
Model No.5501.460Cable management panel with brush strip 482.6 mm (19")
Model No.7140.535Network/server enclosure TS IT with glazed door, with 482.6 mm (19") mounting angles
Model No.5529.120Cable shunting ring
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.