Support arm system CP 180

  • Support section CP 180 Solid
    Support section CP 180 Solid

    Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section.

    More

  • Support section CP 180 Open
    Support section CP 180 Open

    Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via cover section. X-shaped profiling for greater load capacity, large cable routing channels. Upper channel adequate for cables with large connectors (e.g. DVI or VGA) and available/usable throughout the entire system.

    More

  • Support section CP 120 Solid
    Support section CP 120 Solid

    Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Closed cable duct with a large cross-section.

    More

  • Support section CP 120 Open
    Support section CP 120 Open

    Attachment to the connection components with 4 self-tapping screws in the screw channel. May be cut to any required length, no thread-tapping required. Open cable duct for easy servicing access and for pre-assembled cables with connectors, lockable via cover section. X-shaped profiling for greater load capacity, large cable routing channels. Upper channel adequate for cables with large connectors (e.g. DVI or VGA) and available/usable throughout the entire system.

    More

  • Top-mounted joint CP 180 Horizontal outlet
    Top-mounted joint CP 180 Horizontal outlet

    For swivel mounting of the support arm system on horizontal surfaces – also suitable for suspending from the ceiling. Removable cover for simple cable entry.

    More

  • Wall/base mounting bracket CP 180, small
    Wall/base mounting bracket CP 180, small

    For rigid attachment of the support arm system to vertical or horizontal surfaces.

    More

  • Wall-mounted hinge CP 180 Horizontal outlet
    Wall-mounted hinge CP 180 Horizontal outlet

    For swivel mounting of the support arm on vertical surfaces.

    More

  • Coupling CP 180 for support arm connection Ø 130 mm
    Coupling CP 180 for support arm connection Ø 130 mm

    For swivel mounting the enclosure on the vertical section of the support arm system CP 180.

    More

  • Adaptor
    Adaptor

    Connection component between large and small support arm systems as well as for external mounting of small, slimline operating housings

    More

  • Angle piece 90° CP 180
    Angle piece 90° CP 180

    For connecting horizontal and vertical support arm components. Removable covers for simple cable entry.

    More

  • Intermediate hinge CP 180
    Intermediate hinge CP 180

    For vertically hinged connection of horizontal support sections within the support arm system.

    More

+
[X] Close

Required