Roof plates TS
Model No. TS 8801.340
+ Product description
For mounting roof-mounted units, roof-mounted air/water heat exchangers. The cut-outs in the roof plate are arranged so that the roof-mounted cooling units are positioned centrally on the enclosure.
Simple, fast assembly
When mounting cooling units on the roof plate 8801.310, there may be a collision with the enclosure eyebolts. For this reason, roof fastening screws are supplied loose with the roof plates.
Attached to the roof plate 8801.340 from the inside using metal brackets and retaining clamps.
|To fit Model No.:||
Width: 767.5 mm
Height: 13 mm
Depth: 567.5 mm
with width: = 800 mm
with depth: = 600 mm
Width: 692 mm
Depth: 392 mm
Distance from the rear: 57.8 mm
|Customs tariff number:||
TS roof plates, for WD: 800 x 600 mm
– Customers who interested in this item also interested in
Wire end ferrules loose
Model No.4050.730Partial mounting plates for compartment side panel modules (internal compartmentalisation)
Model No.9673.668RiZone Appliance IP node licence
Model No.7990.306Busbars E-Cu with integral holes
Model No.9661.160Electro-hydraulic pump
Model No.4055.720Side panel, screw-fastened, sheet steel for TS, TS IT
Model No.8146.235Partial mounting plate for compartment side panel
Model No.9683.561Baying plate for VX25 Blue e+ integration solution
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.