Swing frame, large, with trim panel for TS, VX SE 800 mm wide enclosures
Model No. 2346.235
Product Lifecycle
Active
Product details
For 800 mm wide enclosures, 22 - 45 U, with trim panel, for mounting 482.6 mm (19'') equipment.
More on the product
Create PDF of this page+ Also required
+ Product description
Design: | 482.6 mm (19") level, side |
---|---|
Product description: | For mounting 482.6 mm (19˝) equipment. |
Material: | Sheet steel |
Surface finish: |
Frame: Zinc-plated Trim panel: Spray-finished |
Colour: | RAL 7035 |
Supply includes: |
Locking rod system with double-bit lock insert Material for attaching |
Installation options: | In the TS/SE with 130° or 180° opening angle, depending on the chosen mounting kit |
Assembly instruction: | Depending on the mounting situation, TS punched sections with mounting flanges 23 x 73 mm or 17 x 73 mm are required |
Note: |
For further installation options, see "Technical details" For two-door enclosures TS, SE with a height of 1800 or 2200 mm the next-smallest swing frame must be installed, due to collision with the lock |
To fit: |
Enclosure type: TS VX SE Width: = 800 mm Height: ≥ 2,200 mm |
Units: | 45 U |
To fit enclosure type: |
TS VX SE |
Packs of: | 1 pc(s). |
Weight/pack: | 24,9 kg |
Customs tariff number: | 94039910 |
EAN: | 4028177165236 |
ETIM 7.0: | EC002620 |
ECLASS 8.0: | 27189261 |
Product description: | SR Swing frame, large, with trim panel, for TS, VX SE, for W: 800 mm, 45 U, installed at the side |
+ Add accessories
+ Tender texts
Large swing frame for network enclosure
45 U can be used for accommodating 482.6 mm (19") equipment.
Torsionally stiff frame, welded from rectangular tube and triple folded
support section. Load capacity up to 1500 N when standard hinges are
used. Distance from inside edge of door to front edge of swing frame 100
mm, may be installed deeper on a pitch pattern of 25 mm. The swing frame
must be fitted to the left / to the right depending on the installation
depth of the equipment. Installation position of equipment mounted to
the side.
Material: sheet steel
Surface finish: RAL 7035
for enclosure width: W: 800 mm
45 U can be used for accommodating 482.6 mm (19") equipment.
Torsionally stiff frame, welded from rectangular tube and triple folded
support section. Load capacity up to 1500 N when standard hinges are
used. Distance from inside edge of door to front edge of swing frame 100
mm, may be installed deeper on a pitch pattern of 25 mm. The swing frame
must be fitted to the left / to the right depending on the installation
depth of the equipment. Installation position of equipment mounted to
the side.
Material: sheet steel
Surface finish: RAL 7035
for enclosure width: W: 800 mm