Interface flap for RC circuit-breaker

Model No. SZ 2482.600

  Product Lifecycle  
Active
  • Interface flap for RC circuit-breaker
    Product details

    According to standard EN 60 204-1, all circuits with a rated current of ≤ 20 A that supply sockets in or on machine enclosures must be fused with a residual-current circuit-breaker with a rated differential current of ≤ 30 mA. Prepared for the installation of standard, 2-pole RCBO circuit-breakers.

    + Product description

    Design: Spring-action terminals max. 2 x 2.5 mm, connection at rear
    Description: According to standard EN 60 204-1, all circuits with a rated current of ≤ 20 A that supply sockets in or on machine enclosures must be fused with a residual-current circuit-breaker with a rated differential current of ≤ 30 mA. Prepared for the installation of standard, 2-pole RCBO circuit-breakers.
    Benefits: Protection against fault currents and overload
    Standard-compliant fuse to EN 60 204
    The RC switch may be reset without opening the enclosure
    Spring mechanism raises the unlocked cover by 30°. This ensures that you do not forget to close the cover.
    Applications: As programming interface for controllers
    As maintenance access for networks
    For temporary connection of additional equipment
    For quick connection to existing network structures
    For programming and maintenance of integral components
    Function principle: A snap fastener ensures reliable sealing. This may be locked if required.
    Material: Mounting frame: Plastic PBT (black)
    Plastic flap: Polycarbonate (semi-transparent)
    Protection category IP to IEC 60 529: IP 65
    Supply includes: Interface flap, complete, consisting of plastic frame, socket (VDE), RJ 45 (jack/jack, Cat 5e) and cut-out for RC circuit-breaker
    Knockout provided for USB A (jack/jack)
    3 mm double-bit with slot-in rotary knob
    Note: Interface flap may only be used with fitted RC circuit-breaker
    Dimensions: Width: 131 mm
    Height: 127 mm
    Rated operating voltage: 250 V, 1~, 50 Hz/60 Hz
    Required mounting cut-out: Width: 117 mm
    Height: 91 mm
    Installation dimensions: Installation depth: 70 mm
    Rated current: At 230 V/50 Hz: 10 A - 16 A
    Packs of: 1 pc(s).
    Weight/pack: 0.58 kg
    EAN: 4028177803732
    Customs tariff number: 85366990
    ETIM 7.0: EC002625
    ETIM 6.0: EC002625
    eCl@ss 8.0/8.1: 27189234
    eCl@ss 6.0/6.1: 27189234
    Product description: SZ Interface flap, complete, mounting frame and interface inserts, with plastic flap, semi-transparent, RJ45, sockel modules Germany, knock-out for RDC protective switch

    + Approvals

    Declarations:
    Declaration of conformity: 
    (EN, DE)

    + Downloads

    Data sheets:
    General technical information: 
    (Global)
    Technical details: 
    (DE)
    Documentation:
    Instructions: 
    (EN, DE)

     
     
     
     
     
     
     

     Interface flap for RC circuit-breaker

    Model No. SZ 2482.600

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close