Product details
Optimal protection concept for a 42 U/47 U server enclosure. Modular design, integrated TS 8 frame with 482.6 mm (19") mounting level.
More on the product
Create PDF of this page+ Product description
Benefits: |
TS 8 supporting structure as frame Front and rear 482.6 mm (19") level with air baffle plates for optimum air routing and thus efficient cooling included in the supply as standard Weight reduction compared with Modular Safe Level E Simple, fast assembly |
---|---|
Applications: |
Solid protection against potential physical threats for IT components Targeted configuration components transform the safe into a complete, compact data centre. |
Material: | Sheet steel, coated |
Colour: |
Enclosure: RAL 7035 Service door: RAL 7035 Operator door: RAL 9005 |
Supply includes: |
Safe with integral TS 8 frame Front and rear 482.6 mm (19") level Adjusted air baffle plates Every side element is prepared for one cable entry at the bottom and one cable entry at the top Operator and service door with swing-lever handle and semi-cylinder |
Options: |
Choice of door hinges Twin-walled doors Different cable entry systems Cable entry in the top and base unit Different lock variants Supporting structure with fire protection |
Note: | Project planning on request |
Protection standards: |
Fire resistance class EI 90/F 90 to DIN EN 1363-1: 1999 based on DIN EN 4102-2:1997 The critical connection points were tested as a system Burglar resistance RC 2, tool attack analogous to DIN EN 1630/2011-09/RC 2 The single safe was tested as a system with single-leaf doors and mechanical lock Smoke protection based on DIN EN 1634-3:2005-01 The single safe was tested as a system with single-leaf doors and mechanical lock |
Dimensions: |
Width: 1,115 mm Height: 2,405 mm |
Clearances: |
Installation height for components: 47 U Clearance height: 2,200 mm Clearance depth: 1,260 mm |
Number of doors: | 2 |
Standard protection from: |
Fire Extinguishing water Vandalism Unauthorised access Dust Theft/burglary |
IP protection category to IEC 60 529: | IP 56 |
Packs of: | 1 pc(s). |
EAN: | 4028177717091 |
ETIM 7.0: | EC002499 |
ECLASS 8.0: | 27180207 |
Product description: | LS Micro Data Centre, Level B |
+ Add accessories
+ Tender texts
Micro Data Centre Level B
Model No. (configurable): 7999.709
A modular configurable IT safe for stand-alone siting that fulfills the
following criteria:
Protection standards:
Fire protection F 90 to EN 1363 and based on DIN 4102
Theft protection RC2 based on EN 1627
Protection category IP 56 (dust and water jets) based on EN 60529
Acrid gas tightness based on EN 1634
All tests for proof of protection standards are carried out in
accredited test houses and documented by test reports.
The safe consists of individual components that are assembled by the
customer.
The individual components consist of sheet-steel encapsulated modules
that are filled with insulation material. The components are connected
by a form-fit connection system.
The safe is designed as a two-door system. Both doors may be used in a
single-leaf or double-leaf version.
Both security doors are equipped with a three-point latch.
The door opens mechanically by means of a swing lever handle.
A semi-cylinder which is integrated in the handle system is used as
standard lock system.
The operator door may be equipped either with an electronic lock for
activated via an external access control system or with an electronic
lock with key combinations.
Each side element is prepared for the use of up to 2 cable entries.
The cable entries are closed with insulating material and sealed with
fire protection material. Alternatively, a cable box is used as cable
entry. The box may be fully populated with cable. In the event of fire
and temperatures exceeding 100° C, the insulation material used in the
box foams up and seals the opening.
At low temperatures, the acrid gas tightness is ensured by a plastic
cover through which the cables are entered and individually sealed.
As an alternative, cable entry in the top or base element may be
realised.
The safe interior is equipped with a torsionally stiff, welded
symmetrical frame of rolled 16-fold vertical sections connected with two
horizontal frames of rolled 9-fold sections.
All frame sections, with integral system punchings on a 25 mm DIN pitch
pattern, allow convenient interior installation by simple fitting and
securing of equipment. All sections have chamfered edges. The vertical
frame sections have two depth/width -recessed mounting levels each,
which can individually be used for flexible attachment of the
installation components.
Two 482.6 mm (19") mounting levels, front and rear, are mounted in the
safe.
The static total load capacity of both mounting levels is 15,000 N.
A mounting level consists of universal mounting angles for server,
network and electronic applications, infinitely depth-variable attached
to depth stays.
The attachment of the mounting angles is flexible, toolless, via quick
release fastener or screw-fastened as an alternative.
Mounting angles, front and rear, including additional pitch pattern of
holes according to standard EIA 310 E.
All height units are labelled and numbered in the opposite direction. U
labelling of both mounting levels can be read from the front for easy
one-man assembly.
All depth stays with integral pitch pattern for fast determination of
the mounting distance and the remaining front free space (clearance).
Front mounting angles, prepared for toolless accommodation of cable
routing aids and organisation of structured cabling in maximum packaging
density or for equipment with a sensor strip for automatic
identification of the installed components by means of Radio Frequency
Identification (RFID).
Rear mounting angles prepared for accommodation of a Power Distribution
Unit (PDU) in 1 U form factor on both sides for enclosure electrical
power distribution, without waste of installation volume thanks to
space-saving side mounting between mounting level and side panel in the
Zero-U space.
Air baffle plates that are adapted to the chosen climate control
solution shield the cold side from the warm side.
Surface finish of the safe: Coated sheet steel
Dimensions internal (WxHxD): 900x2000x1060 mm
Dimensions internal (WxHxD): 900x2200x1060 mm
Dimensions internal (WxHxD): 900x2000x1260 mm
Dimensions internal (WxHxD): 900x2200x1260 mm
Model No.: 7999.709
Manufacturer: Rittal GmbH & Co. KG
Model No. (configurable): 7999.709
A modular configurable IT safe for stand-alone siting that fulfills the
following criteria:
Protection standards:
Fire protection F 90 to EN 1363 and based on DIN 4102
Theft protection RC2 based on EN 1627
Protection category IP 56 (dust and water jets) based on EN 60529
Acrid gas tightness based on EN 1634
All tests for proof of protection standards are carried out in
accredited test houses and documented by test reports.
The safe consists of individual components that are assembled by the
customer.
The individual components consist of sheet-steel encapsulated modules
that are filled with insulation material. The components are connected
by a form-fit connection system.
The safe is designed as a two-door system. Both doors may be used in a
single-leaf or double-leaf version.
Both security doors are equipped with a three-point latch.
The door opens mechanically by means of a swing lever handle.
A semi-cylinder which is integrated in the handle system is used as
standard lock system.
The operator door may be equipped either with an electronic lock for
activated via an external access control system or with an electronic
lock with key combinations.
Each side element is prepared for the use of up to 2 cable entries.
The cable entries are closed with insulating material and sealed with
fire protection material. Alternatively, a cable box is used as cable
entry. The box may be fully populated with cable. In the event of fire
and temperatures exceeding 100° C, the insulation material used in the
box foams up and seals the opening.
At low temperatures, the acrid gas tightness is ensured by a plastic
cover through which the cables are entered and individually sealed.
As an alternative, cable entry in the top or base element may be
realised.
The safe interior is equipped with a torsionally stiff, welded
symmetrical frame of rolled 16-fold vertical sections connected with two
horizontal frames of rolled 9-fold sections.
All frame sections, with integral system punchings on a 25 mm DIN pitch
pattern, allow convenient interior installation by simple fitting and
securing of equipment. All sections have chamfered edges. The vertical
frame sections have two depth/width -recessed mounting levels each,
which can individually be used for flexible attachment of the
installation components.
Two 482.6 mm (19") mounting levels, front and rear, are mounted in the
safe.
The static total load capacity of both mounting levels is 15,000 N.
A mounting level consists of universal mounting angles for server,
network and electronic applications, infinitely depth-variable attached
to depth stays.
The attachment of the mounting angles is flexible, toolless, via quick
release fastener or screw-fastened as an alternative.
Mounting angles, front and rear, including additional pitch pattern of
holes according to standard EIA 310 E.
All height units are labelled and numbered in the opposite direction. U
labelling of both mounting levels can be read from the front for easy
one-man assembly.
All depth stays with integral pitch pattern for fast determination of
the mounting distance and the remaining front free space (clearance).
Front mounting angles, prepared for toolless accommodation of cable
routing aids and organisation of structured cabling in maximum packaging
density or for equipment with a sensor strip for automatic
identification of the installed components by means of Radio Frequency
Identification (RFID).
Rear mounting angles prepared for accommodation of a Power Distribution
Unit (PDU) in 1 U form factor on both sides for enclosure electrical
power distribution, without waste of installation volume thanks to
space-saving side mounting between mounting level and side panel in the
Zero-U space.
Air baffle plates that are adapted to the chosen climate control
solution shield the cold side from the warm side.
Surface finish of the safe: Coated sheet steel
Dimensions internal (WxHxD): 900x2000x1060 mm
Dimensions internal (WxHxD): 900x2200x1060 mm
Dimensions internal (WxHxD): 900x2000x1260 mm
Dimensions internal (WxHxD): 900x2200x1260 mm
Model No.: 7999.709
Manufacturer: Rittal GmbH & Co. KG