Discontinued article.
Information on the discontinued articles
This item will be discontinued on 30.01.2020
This item is being replaced by 6315350
Operating housing AX with handle strips
This item is being replaced by 6315350
Operating housing AX with handle strips
Close
Product details
Operating housings with modern sheet steel handle strips, with support arm cut-out Ø 130 mm to fit support arm system CP 60 / 120 / 180, service access optionally from the front or rear, aluminium front panel easily removable for machining, protection category IP 55.
More on the product
Create PDF of this page+ Product description
| Material: |
Enclosure and door: Sheet steel Handle strips: Aluminium Front panel: Aluminium Cover caps: Plastic |
|---|---|
| Surface finish: |
Enclosure and door: Dipcoat primed, powder-coated on the outside, textured paint Handle strip: Natural anodised Front panel: Natural anodised |
| Colour: |
Enclosure and door: RAL 7035 Handle strip: Natural anodised Front panel: Natural anodised Cover caps: similar to RAL 7024 |
| Supply includes: |
Enclosure with cut-out and reinforcement for support arm connection Ø 130 mm Front with maximum cut-out, covered with easily machinable 3 mm aluminium front panel Side handle strips and cover caps Cam lock with 3 mm double-bit insert Integral interior installation bracket with TS system punchings |
| Dimensions: |
Width: 380 mm Height: 380 mm Depth: 210 mm |
| IP protection category to IEC 60 529: | IP 55 |
| Version with service access: | from the front |
| Note: |
The support arm connection and door hinge may be swapped over by rotating the enclosure Optional: Support arm connection Ø 130 mm, preformed off-centre in the reinforcement plate, easily drilled out Lock systems for servicing access from the front: 41 mm lock inserts, type C, lock cylinder, plastic handles and T handles, type C |
| Basic material: | Aluminium |
| Note on Model No.: | Matching mounting panel 5050.453 with dispatch bag 5050.507 |
| Lock: |
Lock version: Crescent-shaped cam Number of locks: 1 Lock insert: 3 mm double-bit |
| Packs of: | 1 pc(s). |
| Weight/pack: | 9.8 kg |
| EAN: | 4028177693951 |
| ETIM 7.0: | EC002504 |
| ECLASS 8.0: | 27180505 |
| Product description: | CP Operating housing with handle strips, WHD: 380x380x210 mm, Sheet steel, handle strips made of aluminum, Servicing access from the front |
+ Approvals
| Approvals: |
Bureau Veritas:
EN
|
|---|---|
| Declerations: |
Declaration of conformity:
DE, EN
|
