PSM busbars

Model No. 7856.008

  Product Lifecycle  
Active
  • PSM busbars
  • PSM busbars
    Product details

    One or two infeeds, with on or three phases, redundant after changing the plug-in module's direction of connection. With measurement option in conjunction with the CMC III system.

    + Also required

    + Product description

    Design: With 2 infeeds (jack), 3-phase redundancy
    Product description: The modular system facilitates basic configuration of the racks, thanks to a vertical support rail with single-/3-phase infeed. The various socket modules to supply the active components may be snap-fitted into the support rail. This can even be done whilst the system is operational, because the support section is shock hazard-protected.
    Benefits: Modules may be retrofitted whilst operational.
    Technical specifications: Each plug-in module picks off a phase on the support rail, either from infeed or from the redundant infeed, depending on the direction of connection.
    Depending on the design, single-/3-phase construction with a maximum current of 2 x (3 x 16 A/32 A).
    3-phase redundant infeed supported.
    The redundant circuit is completely separate from the 3 phases of the support rail.
    Modules may be equipped with integral overcurrent protection, so that only the affected module is deactivated in the event of an excessively high current. The other modules remain operational.
    Material: Aluminium section, natural anodised
    Type of electrical connection: WAGO X-COM
    Qty.: 2
    Phases per infeed: 3~
    Rated current (max.): 16 A
    Module slots (max.): 8
    To fit: Enclosure type: TS 8
    TS IT
    VX IT
    Height: 2,200 mm
    Operating temperature range: 5 °C...45 °C
    Ambient humidity (non-condensing): 5...95 %
    Storage temperature range: -20 °C...60 °C
    Packs of: 1 pc(s).
    Weight/pack: 3.829 kg
    Customs tariff number: 85369001
    EAN: 4028177616196
    ETIM 7.0: EC000215
    ECLASS 8.0: 27371306
    Product description: DK PSM busbar, 8-way, 3~, 16 A, Infeed: 2, For H: 2200 mm

    + Approvals

    Approvals:
    IEC CB : 
    EN
    VDE: 
    DE, EN
    Declerations:
    Declaration of conformity: 
    DE, EN

    + Downloads / CAD

    Data Sheets:
    Technical system catalogue: 
    DE EN
    Visio Shapes: 
    DE, EN
    Documentation:
    Instructions: 
    DE EN

    + Add accessories

    + Tender texts

    Power System Module busbar for 47 U racks,
    2x3x16 A
    The modular system allows basic equipment of each rack
    with a vertical busbar and three-phase infeed.
    A second infeed is provided per busbar enabling the
    system to be redundant. Due to the vertical
    arrangement the slots may be used over the entire
    enclosure height and the second separate infeed
    ensures redundant supply. Socket modules may be
    snapped into the busbar and thanks to the
    shock-hazard-protected design it is not necessary to
    equip all slots with socket modules. Socket modules
    are available in various country versions, e.g. IEC
    320 C13, earthing pin, F/B, CH, USA, UK. All modules
    may be mixed in the busbar. 8 socket modules may be
    inserted per 2.20m of bar. Up to 48 slots are
    available with IEC 320 modules.

    Installation via the plug & play system:

    The busbar may be retrofitted with the mounting kit DK
    7856.011 in all Rittal TS / PS racks. Power is
    supplied via a 5-pole connection socket with a tension
    spring system. The socket modules may be retrofitted
    whilst operational.

    Technical equipment:

    The three-phase construction with max. 3x16 A per
    circuit. Two separate circuits per support rail. The
    redundant circuit 2 is completely potentially separate
    from circuit 1. The connection direction of the socket
    modules allows you to select either circuit 1 or
    circuit 2. Socket modules may be retrofitted whilst
    the system is operational. Each module optionally with
    / without integral miniature circuit-breaker.

    Technical specifications:

    Voltage range three-phase 110 V - 400 V AC 50/60 Hz
    Neutral connector is required
    Max. current per power supply: 3x16 A
    Temperature application range: +5° up to +45° C
    Humidity application range: 5% to 95%
    rel. humidity, non-condensing
    Protection category: IP 20
    H-section: made of aluminium

    W x H x D [mm]: 60 x 2100 x 60

    Make/model: Rittal
    Type: Power System Module busbar
    for 47 U racks DK 7856.008 or equivalent

     PSM busbars

    Model No.

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close