Swing frame, large, with trim panel for TS, VX SE 800 mm wide enclosures
Model No. 2323.235
Product Lifecycle
Limited
Discontinued article.
Information on the discontinued articles
Product expires on 31.01.2020
This item is being replaced by 8619020
Swing frame, large for VX, 600, 800 and 1200 mm wide enclosures
This item is being replaced by 8619020
Swing frame, large for VX, 600, 800 and 1200 mm wide enclosures
Close
Product details
For 800 mm wide enclosures, 22 - 45 U, with trim panel, for mounting 482.6 mm (19'') equipment.
More on the product
Create PDF of this page+ Also required
+ Product description
| Design: | 482.6 mm (19") level, side |
|---|---|
| Product description: | For mounting 482.6 mm (19˝) equipment. |
| Material: | Sheet steel |
| Surface finish: |
Frame: Zinc-plated Trim panel: Spray-finished |
| Colour: | RAL 7035 |
| Supply includes: |
Locking rod system with double-bit lock insert Material for attaching |
| Installation options: | In the TS/SE with 130° or 180° opening angle, depending on the chosen mounting kit |
| Assembly instruction: | Depending on the mounting situation, TS punched sections with mounting flanges 23 x 73 mm or 17 x 73 mm are required |
| Note: |
For further installation options, see "Technical details" For two-door enclosures TS, SE with a height of 1800 or 2200 mm the next-smallest swing frame must be installed, due to collision with the lock |
| To fit: |
Enclosure type: TS VX SE Width: = 800 mm Height: ≥ 1,200 mm |
| Units: | 22 U |
| To fit enclosure type: |
TS VX SE |
| Packs of: | 1 pc(s). |
| Weight/pack: | 14.85 kg |
| Customs tariff number: | 94039910 |
| EAN: | 4028177165106 |
| ETIM 7.0: | EC002620 |
| ECLASS 8.0: | 27189261 |
| Product description: | SR Swing frame, large, with trim panel, for TS, VX SE, for W: 800 mm, 22 U, installed at the side |
+ Add accessories
+ Tender texts
Large swing frame for network enclosure
Large swing frame for network enclosure
22 U can be used for accommodating 482.6 mm (19") equipment.
Torsionally stiff frame, welded from rectangular tube and triple folded
support section. Load capacity up to 1500 N when standard hinges are
used. Distance from inside edge of door to front edge of swing frame 100
mm, may be installed deeper on a pitch pattern of 25 mm. The swing frame
must be fitted to the left / to the right depending on the installation
depth of the equipment. Installation position of equipment mounted to
the side.
Material: sheet steel
Surface finish: RAL 7035
for enclosure width: W: 800 mm
Large swing frame for network enclosure
22 U can be used for accommodating 482.6 mm (19") equipment.
Torsionally stiff frame, welded from rectangular tube and triple folded
support section. Load capacity up to 1500 N when standard hinges are
used. Distance from inside edge of door to front edge of swing frame 100
mm, may be installed deeper on a pitch pattern of 25 mm. The swing frame
must be fitted to the left / to the right depending on the installation
depth of the equipment. Installation position of equipment mounted to
the side.
Material: sheet steel
Surface finish: RAL 7035
for enclosure width: W: 800 mm
