Bayed enclosure system VX25 Electronic enclosure

Model No. 8410.000

  Product Lifecycle  
Active
  • Bayed enclosure system VX25 Electronic enclosure
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
  • Bayed enclosure system VX25 Electronic enclosure Anreih-Systeme TS 8
    Product details

    Ideal for 482.6 mm (19") assemblies and 482.6 mm (19") slide-in equipment: With 482.6 mm (19") adaptor sections at the front, front frame, rear door, roof plate and divided gland plates.

    More on the product

    Create PDF of this page

    + Product description
    Material: Enclosure frame: Sheet steel, 1.5 mm
    Roof: Sheet steel, 1.5 mm
    Front frame: Extruded aluminium sections with die-cast corner pieces
    Rear door: Sheet steel, 2.0 mm
    Gland plates: Sheet steel, 1.5 mm
    Adaptor sections, 482.6 mm (19"): Sheet steel, 2 mm
    Surface finish: Enclosure frame: Dipcoat-primed
    Roof and rear door: Dipcoat primed, powder-coated on the outside, textured paint
    Front frame: Powder-coated
    Gland plates: Zinc-plated
    Colour: RAL 7035
    Supply includes: Enclosure frame
    Front frame (r/h hinge, held on the left via magnetic snap fasteners)
    Rear door (r/h hinge, may be swapped to opposite side)
    Roof plate
    Gland plates
    Adaptor sections, 482.6 mm (19"), front
    Dimensions: Width: 600 mm
    Height: 1,600 mm
    Depth: 600 mm
    Packs of: 1 pc(s).
    Weight/pack: 58 kg
    EAN: 4028177920231
    ETIM 7.0: EC000261
    ECLASS 8.0: 27180101
    Product description: VX Electronic enclosure, WHD: 600x1600x600 mm, sheet steel, with hinged front frame, with adaptor sections 19", single door at the rear

    + Approvals
    Certificates:
    Surface finish: 
    DE EN

    + Downloads / CAD
    Data Sheets:
    Documentation:
    Further information: 
    CS DA DE EN ES FI FR HU IT NL NO PL PT RU SV TR
    Load brochure: 
    CS DE EN FR IT PL RU
    Protective conductor brochure: 
    CS DE EN FR IT
    Safety instructions: 
    DE, EN, ES, FI, FR, IT, NL, PL, RU, SV

    + Add accessories

    + Tender texts

    Housing:
    symmetrical frame construction, consisting of
    closed an profiled hollow section with 25 mm
    pitch pattern.
    Frame with integrated blind rivet nut M6 enables for
    protection class oriented fixing
    of fitting parts at the profile.
    All sections have chamfered edges.
    Horizontal sections have a protection lip above the seal.
    Circumferential equal profiles with two mounting levels
    accessible from inside and outside of the frame for
    space-saving and fast interior installation.
    The entire square perforation enables the use of cage nuts
    and metrical screws up to M8.
    Welded base frame with integrated base reinforcement
    allows to fasten the enclosure on the underground through
    the inner side of the enclosure.
    Mounted three-piece gland plate, removable and exchangable.
    Bayable on all sides.
    Load capacity up to 15.000 N.
    Front frame:
    with adapter profiles 19" (482.6 mm),
    hinged on the right, held on the left with
    magnetic catches.
    Installation height for components: 33 U.
    Sheet steel door, rear:
    with foamed-in seal, with removable tubular door frame
    perforation in a 25 mm grid and
    integrated cable clamping.
    4-point latch locking rod, double-bit insert to DIN 43668,
    Door hinge may be swapped from right to left.
    Hinges with captive hinge pins, door opening angle 130°
    tool-less retrofittable to 180°. Floor clearance 17 mm.
    Roof panel:
    With foamed-in seal, removable.
    Roof with roof fixing screws M12.
    Flat parts:
    Roof, front frame, rear door, gland plates
    in the scope of supply
    Side panels are available as separate accessory.
    Roof and floor panels are electrically conductive connected
    to the frame (automatic potential equalisation)
    to DIN 62 208 and
    prepared for the additional attachment of earthing straps.
    QR code:
    Printed QR code on the roof, rear door
    and type plate for unambiguous marking and for
    easy recall of relevant product information and
    documentation, as well as clear traceability of
    single parts.
    Material:
    Enclosure frame, roof: 1.5 mm sheet steel
    Front frame: Extruded aluminium profiles with
    zinc die-cast corner pieces
    Rear door: 2 mm sheet steel
    Floor panels: 1.5 mm, sheet steel
    Adapter profiles 19": 2 mm, sheet steel
    Surface finish:
    Triple surface treatment for corrosion protection and resistance
    and resistance to mineral oils, lubricants,
    machining emulsions and solvents: nanoceramic coating,
    electrophoresis dip primer,
    Roof and rear door powder-coated in RAL 7035 structure.
    Front frame: powder-coated
    Bottom panels: galvanised
    Dimensions (W x H x D): 600x1600x600 mm; 33 U

     Bayed enclosure system VX25 Electronic enclosure

    Model No.

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close