Divider panel for TS
Model No. TS 8609.860
For shielding individual enclosure cells. Thanks to the symmetry of the frame system, the divider panel can also be used at the rear.
+ Product description
For shielding individual enclosure cells. All-round, double fold for stability and to hold the seal. Thanks to the symmetry of the enclosure frame, divider panels may also be fitted at the rear, dimensions permitting.
Notches in the corners and half-way up the sides permit the use of angular baying brackets and baying brackets, even with a divider panel fitted.
Sheet steel, 1.5 mm
|Protection category IP to IEC 60 529:||
Enclosure type: TS 8
Height: = 1800 mm
Depth: = 600 mm
For mounting on the outer mounting level
This leaves the inner level free for further population
|Customs tariff number:||
TS Divider panel, for TS, for WD: 1800x600 mm
+ Add accessories
– Customers who interested in this item also interested in
Wire end ferrules on a reel
Model No.4051.600Wiring plan pocket of sheet steel for VX, TS, CM, SE, PC, TP pedestal
Model No.4124.000Network enclosure TE 8000
Model No.7888.532Pleated filter for Blue e+ roof-mounted cooling unit and VX25 Blue e+ integration solution
Model No.3285.700Angle coupling 90°, CP 120 for support arm connection Ø 130 mm
Model No.6212.380PDU UK, metered version
Model No.7955.521LED system light US version
Model No.2500.114Connection plate for laminated copper bars
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.