Base/plinth component consisting of one trim panel and two pre-configured corner pieces.
- Article no.:
- TS 7825801
- Design
- Vented
- Product description
- Base/plinth component consisting of one trim panel and two pre-configured corner pieces.
- Material
- Base/plinth components: Sheet steel
Cover caps: Plastic - Surface finish
- Spray-finished
- Colour
- RAL 7035
Cover caps: RAL 7035 - Supply includes
- 2 base/plinth components
4 cover caps
Assembly parts - Dimensions
- Height: 100 mm
- To fit
- Enclosure type: TS: = 800 mm
Enclosure type: SE
Enclosure type: CM
Enclosure type: TP
Enclosure type: PC
Enclosure type: IW
Enclosure type: TS IT - Packs of
- 2 pc(s).
- Net weight
- 3.9 kg
- Gross weight
- 4.337 kg
- Customs tariff number
- 94039910
- EAN
- 4028177234406
- ECLASS 8.0
- 27182003
Front and rear vented base/plinth components for DK TS,
800 mm wide enclosure
The vented base/plinth component consist of a front
trim panel with ventilation slots and two pre-assembled
corner pieces.
The plinth is completed by the addition of extra side
trims. The plinth is fixed in place using the screws in
the corner pieces, which are easy to reach from the
outside. Optional filter mats can be attached to the
vented trim panels in order to keep dust out. The
plinth can be bolted directly to the floor or fixed in
place using base assembly plates. Using baying brackets
enables easy linking within enclosure suites and the
side trim plates can be turned to simplify cable entry
between the separate enclosures. The inside of the
plinth provides many options for the configuration
additional mounting levels
Material: Plinth unit, spray finished steel plate
Corner cover = plastic
Colour: RAL 7035
Plinth height: 100 mm
for enclosure width: 800 mm
800 mm wide enclosure
The vented base/plinth component consist of a front
trim panel with ventilation slots and two pre-assembled
corner pieces.
The plinth is completed by the addition of extra side
trims. The plinth is fixed in place using the screws in
the corner pieces, which are easy to reach from the
outside. Optional filter mats can be attached to the
vented trim panels in order to keep dust out. The
plinth can be bolted directly to the floor or fixed in
place using base assembly plates. Using baying brackets
enables easy linking within enclosure suites and the
side trim plates can be turned to simplify cable entry
between the separate enclosures. The inside of the
plinth provides many options for the configuration
additional mounting levels
Material: Plinth unit, spray finished steel plate
Corner cover = plastic
Colour: RAL 7035
Plinth height: 100 mm
for enclosure width: 800 mm