SE 8 free-standing enclosure system Stainless steel

Model No. 5851.500

  Product Lifecycle  
Expired
  • SE 8 free-standing enclosure system Stainless steel
  • SE 8 free-standing enclosure system Stainless steel

    Discontinued article.

    Information on the discontinued articles
    This item will be discontinued on 31.01.2021
    This item is being replaced by 5851600
    VX SE free-standing enclosure system Stainless steel
     

    Close
    Product details

    Enclosure widths ranging from 600 to 1200 mm Time-saving assembly work due to the roll-formed side panels

    + Product description

    Product description: The system enclosure is based on the TS 8 platform. System accessories for interior installation in the TS 8 design can be used without restrictions.
    Material: Enclosure: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed
    Door: Stainless steel 1.4301 (AISI 304), 2.0 mm, exterior brushed
    Rear panel: Stainless steel 1.4301 (AISI 304), 1.5 mm, exterior brushed
    Gland plates: Stainless steel 1.4301 (AISI 304), 1.5 mm
    Mounting plate: Sheet steel, 3.0 mm
    Surface finish: Enclosure, door and rear panel: Brushed, grain size 400
    Gland plates: Uncoated
    Mounting plate: Zinc-plated
    Supply includes: Enclosure, solid top and sides
    Door(s)
    R/h door hinge with single-door enclosures, may be swapped to opposite side
    Rear panel, detachable
    Mounting plate
    Gland plates
    Lock: 3 mm double-bit
    2 TS punched rails 18 x 38 mm
    Dimensions: Width: 600 mm
    Height: 1,800 mm
    Depth: 500 mm
    Dimensions mounting plate (W x H): 499 mm x 1,696 mm
    Protection category to IEC 60 529: IP 55
    Protection category NEMA: NEMA 12
    NEMA 3R
    IK Code: IK10
    Number of doors: 1
    Note: Due to the hardness of the material, we recommend using metal multi-tooth screws for the interior installation.
    Basic material: Stainless steel
    Packs of: 1 pc(s).
    Weight/pack: 99 kg
    EAN: 4028177666665
    ETIM 7.0: EC000261
    ECLASS 8.0: 27180101
    Product description: SE Free-standing enclosure system, WHD: 600x1800x500 mm, Stainless steel 1.4301, with mounting plate, single door at the front

    + Approvals

    Approvals:
    UL + C-UL (listed): 
    EN
    Declerations:
    Declaration of conformity: 
    DE, EN

    + Downloads / CAD

    Data Sheets:
    Technical details: 
    CS DA DE EN ES FI FR HU IT NL NO PL RU SV TR ZH
    Technical system catalogue: 
    DE
    Documentation:
    White Paper: 
    DE EN

    + Add accessories

    + Tender texts

    Single-door stainless steel system enclosure
    Enclosure for stand-alone siting in self-supporting
    integrated construction, consisting of a basic frame,
    door, rear panel and base assembly. Basic frame made
    of one-piece construction including side panels and
    roof. Enclosure section with system punchings on a
    25 mm DIN pitch pattern. Vertical sections as well as
    front and rear roof frame section with two mounting
    levels for space-saving system installation.
    Screw-fastened rear panel, welded base assembly
    consisting of base frame and multi-divided, sliding
    gland plates, r/h door hinge.
    Door:
    With horizontally double foamed-in seal, with
    removable rectangular frame with holes on a 25 mm DIN
    pitch pattern, locking bar with 4-point latching,
    double-bit insert to DIN 43668, r/h door hinge may be
    swapped to opposite side, with captive hinge pins,
    door opening angle 130° to VDI, may be retrofitted to
    180°, automatic potential equalisation to the
    enclosure frame.
    Gland plates:
    3-part, removable and replaceable, fitted, automatic
    potential equalisation to the enclosure frame.
    Rear panel:
    With foamed-in seal, screw-fastened, automatic
    potential equalisation to the enclosure frame.
    Mounting plate:
    C-folds at the sides, depth-adjustable on a 25 mm
    pitch pattern via integrated plastic slide pieces.
    Punched rail in the base for easy sliding of mounting
    plate may be removed after positioning the mounting
    plate and located on the vertical sections, e.g. for
    cable routing.
    Material: ,,
    Stainless steel 1.4301 (AISI 304) for enclosures,
    door, rear panel and gland plates. Sheet steel for
    mounting plate
    Surface finish: ,,
    Enclosure, rear panel, gland plates and doors:
    Brushed, grain 400
    Mounting plate: Zinc-plated
    Protection category:
    IP 55 to EN 60 529, complies with NEMA 12.
    Dimensions:
    Width x height x depth: 600x1800x500 mm,
    mounting plate (width x height): 499x1696 mm
    Make/model:
    Rittal SE 5851.500 (or equivalent)


     SE 8 free-standing enclosure system Stainless steel

    Model No.

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close