Discontinued article.
Information on the discontinued articles
This item will be discontinued on 30.01.2020
This item is being replaced by 1516000
Small enclosures KX Terminal box KX, sheet steel, without gland plate
This item is being replaced by 1516000
Small enclosures KX Terminal box KX, sheet steel, without gland plate
Close
Product details
Spray-finished enclosure with sheet steel cover, without gland plate Protection category IP 66.
More on the product
Create PDF of this page+ Product description
Material: |
Enclosure: Sheet steel Cover: Sheet steel, all-round foamed-in PU seal |
---|---|
Surface finish: | Enclosure and cover: Dipcoat primed, powder-coated on the outside, textured paint |
Colour: | RAL 7035 |
Supply includes: |
Enclosure with cover Quick-release fastener including plastic bushes |
Protection category NEMA: | NEMA 4 |
Protection category to IEC 60 529: | IP 66 |
IK Code: | IK08 |
Dimensions: |
Width: 200 mm Height: 200 mm Depth: 80 mm |
Material thickness - cover: | 1,25 mm |
Material thickness - enclosure: | 1,25 mm |
Basic material: | Sheet steel |
Packs of: | 1 pc(s). |
Weight/pack: | 1,9 kg |
Customs tariff number: | 73269098 |
EAN: | 4028177251281 |
ETIM 7.0: | EC000261 |
ECLASS 8.0: | 27180101 |
Product description: | KL Terminal box, WHD: 200x200x80 mm, Sheet steel, without mounting plate, with cover, without gland plate |
+ Approvals
Approvals: | |
---|---|
Declerations: |
+ Add accessories
+ Tender texts
Terminal box without gland plate (80 mm deep), protection cat. IP 66
Enclosure:
sturdy sheet steel construction, folded and welded from a single piece,
with all-round protection channel on the
cover aperture, rear panel with recessed holes for wall mounting
brackets, cover of sheet steel, sealed, with a highly
elastic, foamed-in special seal, facilities for connecting PE conductors
in the cover and box, profile strips on both internal sides with
mounting holes. Special plastic bush guards against accidental loss of
the cover screws and provides screwdriver guidance.
Accessories:
quick-release fastener, cover retainer, plastic cable gland plate, cover
hinges, mounting plate
Surface finish:
steel is cleaned, degreased, phosphated, electrophoretic dipcoat primed
and electrostatically polyester powder-coated in textured RAL 7035
Dimensions (W x H x D): 200 x 200 x 80 mm
Enclosure:
sturdy sheet steel construction, folded and welded from a single piece,
with all-round protection channel on the
cover aperture, rear panel with recessed holes for wall mounting
brackets, cover of sheet steel, sealed, with a highly
elastic, foamed-in special seal, facilities for connecting PE conductors
in the cover and box, profile strips on both internal sides with
mounting holes. Special plastic bush guards against accidental loss of
the cover screws and provides screwdriver guidance.
Accessories:
quick-release fastener, cover retainer, plastic cable gland plate, cover
hinges, mounting plate
Surface finish:
steel is cleaned, degreased, phosphated, electrophoretic dipcoat primed
and electrostatically polyester powder-coated in textured RAL 7035
Dimensions (W x H x D): 200 x 200 x 80 mm