Network/server rack VX IT with vented doors, with 482.6 mm (19") mounting angles, standard

Model No. 5309.116

  Product Lifecycle  
Active
  • Network/server rack VX IT with vented doors, with 482.6 mm (19
    Product details

    VX IT network/server enclosure, vented, for room climate control. 482.6 mm (19") interior installation with depth-variable 482.6 mm (19") mounting angles in the standard version, available in a range of size variants.

     Recommended accessories

    + Product description

    Material: Sheet steel
    Aluminium
    Surface finish: Enclosure frame: Dipcoat-primed
    Interior installation: Spray-finished
    Rear door and roof: Dipcoat-primed, powder-coated
    Front door: Aluminium, anodised/spray-finished
    Colour: Enclosure frame, rear door and roof: RAL 7035
    Front door: Vertical sections, silver coloured and horizontal sections, RAL 9005
    Interior installation, vent grille at the front: RAL 9005
    Handle and hinges: RAL 9005
    Supply includes: VX enclosure frame with doors and roof plate
    Aluminium/sheet steel door at the front, vented (vented surface area approx. 85% perforated), 180° hinges
    Sheet steel rear door, vented (vented surface area approx. 85% perforated)
    Lock front and rear: Comfort handle for profile half-cylinders and security lock 3524 E
    Mounting angles, 482.6 mm (19")
    Spacers, height 50 mm, to raise a cover plate above the fan cut-out in the roof plate, for passive cooling (supplied loose). Not required for variants without a cut-out.
    12 x 482.6 mm (19") fastener, 1 U, conductive (supplied loose)
    25 multi-tooth screws, conductive (supplied loose)
    IPPC pallet
    Roof plate, multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
    Sheet steel rear door, vented, vertically divided, 180° hinges
    Dimensions: Width: 800 mm
    Height: 2,000 mm
    Depth: 1,000 mm
    Units: 42 U
    Free mounting space to the 482.6 mm (19") level, front/rear: 87 mm / 193 mm
    Mounting position of the 482.6 mm (19") level: front and rear
    Distance between levels as delivered: 720 mm
    482.6 mm (19") attachment: on depth stays, screw-fastened at the top and bottom
    Design: Standard
    Cover version: multi-piece, with side cable entry in the depth, double-sided, prepared for fan mounting plate
    Mounting angle version: 482.6 mm (19") mounting angles, standard in the VX IT
    Base design: Open
    482.6 mm (19") level(s) version: front and rear
    Load capacity: 15.000 N
    Max. load capacity (static) per enclosure to UL 2416: 12.000 N
    Note: Depending on how and where it is sited, the door opening angle may vary for selected applications
    Basic material: Sheet steel
    Construction rear door: Sheet steel door, vented, vertically divided, 180° hinges
    Construction front door: Aluminium/sheet steel door, vented, one-piece, 180° hinges
    Packs of: 1 pc(s).
    Weight/pack: 95 kg
    EAN: 4028177945081
    ETIM 8: EC002499
    ETIM 7.0: EC011217
    ECLASS 8.0: 27180207
    Product description: VX IT, 19" mounting angles, standard, front and rear, vented, WHD: 800 x 2000 x 1000 mm, 42 U

    + Approvals

    Approvals:
    UL + C-UL (listed): 
    EN
    Certificates:
    Surface finish: 
    DE EN
    Declerations:
    Declaration of conformity: 
    CS DE, EN
    Declaration of conformity UK: 
    EN

    + Downloads / CAD

    Data Sheets:
    Technical details: 
    DE EN
    Visio Shapes: 
    DE, EN DE, EN
    Documentation:

    + Add accessories

    + Tender texts

    VX IT network, server and electronics enclosure, "standard" variant,
    IT rack, installation height 42 U, vented aluminium sheet steel door at
    the front,
    two-piece, vented sheet steel door at the rear.
    Rack frame:
    Pre-configured IT rack, comprising a torsionally rigid, welded and full
    symmetrical frame of rolled, 9-fold closed hollow profile, with punchin
    in a 25 mm pitch pattern.
    Frame with integrated M6 blind rivet nuts, to enable fittings to be
    mounted without impairing the degree of protection. All profile edges
    are chamfered. Horizontal sections with integrated channel above the PU
    foam seal as protection for the seal.
    Same profile on all sides, with two mounting levels accessible from
    inside and outside, for fast and space-saving interior installation.
    Square holes on all sides to enable the use of cage nuts and metric
    screws up to M8.
    Base:
    Welded base frame with integrated reinforcement to enable direct boltin
    to the floor from inside the enclosure. Open base frame, without gland
    plates, for optional individual configuration with base modules from th
    range of accessories.
    Baying possible on all sides. Static load capacity up to 15,000 N, and
    up to 12,000 N acc. to UL 2416.
    Front and rear door:
    Vented aluminium sheet steel front door, with perforated sheet steel
    panel, 85% free ventilation area, held in a frame of aluminium sections
    vertical sections silver-grey anodised,
    horizontal sections painted, RAL 9005.
    Door with three hinges and four-point locking rod. Door hinge can be
    swapped from right to left, hinge pins with integrated adjustment aid,
    door opening angle 240° for stand-alone enclosures, 105° with baying.
    Sheet steel rear door, two-piece, vertically divided, vented. Perforate
    surface with 85% free ventilation area. Rear door with integrated
    reinforcement section on both sides, with three hinges and three-point
    locking rod.
    Door hinge can be swapped from right to left, hinge pins with integrate
    door opening angle 240° for stand-alone enclosures, 160° with baying.
    Baying hinges with 180° opening angle for front and rear doors availabl
    separately via the range of accessories.
    Both doors with comfort handle for semi-cylinder (30/10) mm, with
    security lock 3524 E.
    Roof plate:
    Multi-part roof plate with cable entry on both sides via brush strips
    over the whole enclosure depth. The multi-part design permits removal o
    the roof plate with the cabling in place, which greatly simplifies late
    retrofitting or modification. Roof incorporating a concealed cut-out to
    accommodate a fan unit for active ventilation. To support passive
    ventilation, the cover plate can be raised on spacer pillars, if
    required.
    Mounting levels:
    Enclosure pre-configured with two 482.6 mm (19") mounting levels, front
    and rear.
    The total static load capacity of both mounting levels is 15,000 N.
    Dynamic load capacity (moving on transport module) up to 10,000 N.
    Mounting level comprising universal mounting angles for server, network
    and electronics applications, front and rear, depth-variable, 15 mm
    pitch pattern,
    screw-fastened to the enclosure frame via depth stays at top and bottom
    Imperial mounting levels can be positioned either symmetrically or
    asymmetrically with an offset to each other. Alternative mounting
    dimensions for 21", 23" or 24" components can also be realised.
    Mounting angles front and rear, material thickness 2.0 mm, with
    additional pitch pattern in accordance with the standard EIA 310 E. All
    height units are marked on the mounting angles and numbered in opposite
    directions. Height unit markings on both mounting levels can be read
    from both inside and outside for simplified component installation.
    Front mounting angles prepared for tool-free mounting of cable routing
    aids and organisation of structured cabling with maximum packing
    density.
    Rear mounting angles prepared on both sides for mounting of a Power
    Distribution Unit (PDU) in 1 U form factor for electrical power
    distribution in the enclosure, avoids occupying component installation
    space thanks to space-saving side mounting in the zero-U space between
    mounting level and side panel.
    Supply includes:
    Practice-proven mounting accessories, such as spacers for optional
    raising of the cover plate, fixing accessories for 19" components
    comprising twelve 19" fasteners, 1 U, contacting, and 25 hexagon socket
    screws, conductive, with washers for thread size M5.
    Potential equalisation:
    All panel parts with automatic potential equalisation or prepared for
    the attachment of earthing straps.
    482.6 mm (19") assembly parts are supplied loose.
    A potential equalisation kit is available as an accessory.
    Side panels:
    Side panels are not included in the scope of supply.
    One-part screw-fastened variant (IP 55) as well as horizontally divided
    and vertically divided, hinged variant (IP 20) available via the range
    of accessories.
    QR code:
    Printed QR codes on all panel parts, the roof, doors and rating plate
    provide for the unambiguous marking of individual components, simplify
    access to relevant product information and documentation, and ensure th
    full traceability of single parts.
    Material:
    Enclosure frame, roof: Sheet steel 1.5 mm
    Rear door: Sheet steel 1.5 mm
    Front door: Aluminium, sheet steel 1.5 mm
    482.6 mm (19") mounting angles: Sheet steel 2.0 mm
    Surface finish (sheet steel):
    Triple surface treatment for corrosion protection and resistance to
    mineral oils, lubricants, machining emulsions and solvents: Nanoceramic
    coating, electrophoretic dipcoat priming, textured powder coating in RA
    7035/9005.
    Protection classes:
    Protection category according to IEC 60 529 (with mounted side panels o
    in a bayed suite with seals):
    IP 00
    Protection category according to NEMA (with mounted side panels or in a
    bayed suite with seals):
    ---
    Surface finish:
    Panel parts, doors, interior installation, painted in RAL 7035/9005
    Aluminium front door, vertical, aluminium, silver-grey anodised
    Aluminium front door, horizontal, aluminium, painted in RAL 9005
    Aluminium front door, sheet steel panel, painted in RAL 9005
    Approvals:
    UL2416 NITW (NFPA70, NFPA75)
    IEC/EN 60950 (CB Certificate and Report)
    IEC/EN 62368 (CB Certificate and Report)
    Dimensions (WHD): 800x2000x1000 mm
    Earthing measures in accordance with the risk assessment
    according to DIN EN 62368-1 are not required for VX IT cabinets,
    therefore an earthing accessory is not included in the scope of deliver
    For increased EMC requirements a potential equalization set can be
    purchased via the accessories programme. (5302.027 and 5302.028)
    Model No: VX IT 5309.116
    Manufacturer: Rittal GmbH & Co. KG

     Network/server rack VX IT with vented doors, with 482.6 mm (19") mounting angles, standard

    Model No.

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close