CMC III I/O units

Model No. 7030.040

  Product Lifecycle  
Active
  • CMC III I/O units
    Product details

    Monitoring of up to eight digital inputs and control of to to four relays.

    + Also required

    + Product description

    Product description: In the software, the relays can be linked to measurement values so that they are actuated under certain circumstances. This allows devices to be controlled and messages to be forwarded. Cannot be operated with the Processing Unit Compact.
    Benefits: Fast connection and automatic detection via plug & play
    Minimal space requirements due to high concentration of inputs and outputs.
    Function principle: Automatic sensor detection by the Processing Unit with consecutive numbering of the sensors
    Power is supplied via the CAN-BUS interface.
    Status display via integral LED
    Inputs for earth-free signals
    Relay output (changeover contact) can handle loads of up to max. 24 V (DC)/1 A
    Material: Plastic
    Front: Smooth
    Enclosure: Textured
    Colour: Enclosure: RAL 7035
    Front: RAL 9005
    Supply includes: CMC III I/O Unit
    Assembly parts for mounting on surfaces
    Interface bus system: 2 x RJ45 CAN bus
    Interfaces: 8 digital inputs
    4 relay outputs (max. 24 V DC/1 A)
    No. of participants per IoT interface (max.): 16
    No. of participating PU (max.): 8
    Note: Cannot be operated with the Processing Unit Compact
    Dimensions: Width: 138 mm
    Height: 40 mm
    Depth: 132 mm
    Operating temperature range: 0 °C...55 °C
    Ambient humidity (non-condensing): 5...95 %
    Packs of: 1 pc(s).
    Weight/pack: 0,62 kg
    Customs tariff number: 85311095
    EAN: 4028177659360
    ETIM 7.0: EC002627
    ECLASS 8.0: 27189253
    Product description: DK CMC III I/O Unit, For signal receiving and passing on control commands, WHD: 138x40x132 mm, Monitoring: > 8 digital inputs, Control: > 4 Relais

    + Approvals

    Approvals:
    UL + C-UL (listed): 
    EN
    Declerations:
    Declaration of conformity: 
    CS DE, EN DE, EN EN PT
    Manufacturer's declaration: 
    EN

    + Downloads / CAD

    Data Sheets:
    Graphics: 
    DE
    Documentation:
    Instructions: 
    DE EN RU
    Quick guide: 
    DE, EN, FR RU

    + Add accessories

    + Tender texts

    7030.040
    CMC III I/O Unit
    Packs of 1
    Compact plastic housing with ventilated front in RAL 9005.
    Housing in RAL 7035, The unit has two RJ45 connections with an
    integrated CAN bus. The unit is automatically detected by the CMC III
    system, the Processing Unit, and is provided with a sequential number in
    the bus sequence. Integrated multi-colour LED as status display. The I/O
    unit has eight digital inputs and four relay outputs. With the digital
    inputs, signals can be received from third-party systems and processed
    in the CMC III. Via the relay outputs, the CMC III can carry out control
    commands or pass on messages to third-party systems.
    The power supply is ensured by connection to the CAN bus for the
    Processing Unit.
    The alarm texts can be set via the software for the CMC III Processing
    Unit, however they are saved in the Unit itself.
    Technical specifications:
    Digital inputs (terminal): 8 x NC/NO
    Relay output (terminal): 4
    Change-over contact max. 24 V DC,1 A
    CAN bus jacks RJ45: 2
    Rated voltage: 24V DC
    WxHxD: 138 x 40 x 120+12 Front mm
    Temperature application range:
    0 °C to 55 °C
    Humidity range:
    5% to 95% relative humidity, non-condensing
    Protection category: IP 30 to IEC 60 529
    Included in the pack: Unit, quick reference guide, side mounting and
    top-hat rail mounting set

     CMC III I/O units

    Model No.

    Close
    +
    [X] Close

    Required 

    $nbsp;

    Product data (ZIP)

    Rittal does not assume any liability for the topicality of the data downloaded locally on your device.

     I agree

    Close