CMC III sensors
Model No. DK 7030.120
Monitor various parameters in enclosures or rooms
+ Also required
+ Product description
Infrared access sensor
CMC III sensors monitor the physical ambient conditions. Every sensor has a specific measuring or control task. Sensors starting with model numbers 7030... are equipped with a CAN bus interface and can be connected to Processing Unit III or the IoT interface directly in the bus. Sensors starting with model numbers 7320... can be integrated into the bus using adaptor CAN bus sensor 7030.100.
Fast connection and automatic detection via plug & play
Power is supplied via the CAN-BUS interface.
Monitoring of enclosures in the areas of IT, industry and facility management
Monitoring of enclosures, rooms and containers in the IT environment
Settings can be made via the CMC III processing unit or IoT interface
The CMC III infrared access sensor uses infrared light to monitor whether the enclosure door is open or closed.
The sensor has an integrated infrared transmitter and receiver.
The sensor is mounted in the enclosure and pointed at the door so that the light is reflected by a reflector strip on the door.
Front: RAL 9005
Enclosure: RAL 7035
|Protection category IP to IEC 60 529:||
Installation and Short User's Guide
Mounting clips for support rails
Reflective adhesive strips
Width: 80 mm
Height: 30 mm
Depth: 40 mm
|Connection to the CAN bus:||
|Maximum no. of users:||
CMC III Processing Unit Compact: 4
CMC III Processing Unit: 32
IoT interface: 32
Operation (environment): +0 °C...+55 °C
|Ambient humidity (non-condensing):||
Operation (environment): 5 % - 95 %
Infrared diode with receiver and reflector
General: 2 x RJ45 CAN bus
|Customs tariff number:||
DK CMC III Infrared access sensor, WHD: 80x28x40 mm
– Customers who interested in this item also interested in
Model No.7979.136CMC III I/O units
Model No.7030.040Component shelf, 482.6 mm (19") configuration Enclosures with L-shaped mounting angles front and rear
Product data (ZIP)