Divider panel for TS
Model No. TS 8609.080
+ Product description
For shielding individual enclosure cells. All-round, double fold for stability and to hold the seal. Thanks to the symmetry of the enclosure frame, divider panels may also be fitted at the rear, dimensions permitting.
Notches in the corners and half-way up the sides permit the use of angular baying brackets and baying brackets, even with a divider panel fitted.
Sheet steel, 1.5 mm
|Protection category IP to IEC 60 529:||
The divider panel may also be fitted at the rear. This allows, e.g. frequency converters for heat dissipation to be installed in a divider panel with the cooling units facing outwards and protected/finished off with a cover.
Enclosure type: TS 8
Height: = 2000 mm
Depth: = 800 mm
For mounting on the outer mounting level
This leaves the inner level free for further population
|Customs tariff number:||
TS Divider panel, for TS, for WD: 2000x800 mm
+ Add accessories
+ Spare parts
– Customers who interested in this item also interested in
Glazed door for TS, TS IT, SE
Model No.8610.605Enclosure panel holders, internal for TS, SE
Model No.8800.071Hinge for side panel TS, screw-fastened, sheet steel
Model No.8800.110Self-tapping screws
Model No.2489.000PS punched section with mounting flange 23 x 73 mm for TS, SE
Model No.4365.000Swing frame stay
Model No.1979.200PS punched section with mounting flange 23 x 73 mm for TS, SE
Model No.8800.650Baying systems TS 8 for modular front design
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.