Enclosure Heater with fan

Article number: SK 3105.390

Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits. Version with fan. Continuous thermal output 235 – 800 W.

Quantity PU *

* Packaging unit = 1 pc.

Article number
SK 3105.390
Description
Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits.
Material
Plastic
Protection category IP to IEC 60 529
IP 20
Supply includes
PTC heater with fan
Fasteners
Note
A thermostat is recommended for precise temperature control inside the enclosure
In order to prevent condensation on assemblies, hygrostat is recommended to regulate heating
In larger enclosures, even heat distribution is best achieved by installing several low-output heaters.
Continuous thermal output at 10 °C
400 W - 415 W
Note: Continuous thermal output with fan
Rated operating voltage
230 V, 1~, 50 Hz/60 Hz
Dimensions
Width: 103 mm ( 4.1" )
Height: 200 mm ( 7.9" )
Depth: 103 mm ( 4.1" )
Miniature circuit-breaker/fuse
6 A
Integrated fan
yes
eCl@ss 8.0/8.1
27180710
Packaging unit
1 pc(s)
Weight/packaging unit
1.22 kg ( 2.7lb. )
EAN
4028177662872
Customs tariff number
85162999
ETIM 7.0
EC000737
ETIM 6.0
EC000737
eCl@ss 8.0/8.1
27180710
eCl@ss 6.0/6.1
27180710
Product description
SK enclosure heater, with fan, 400/415 W, 230 V, 1~, 50/60 Hz, WHD: 103 x 200 x 103 mm
Approvals
Approval overview
CSA
UR + C-UR
VDE
Certificates
EAC
Declarations
Declaration of conformity
NA