- Article number:
- DK 7186.735
- Design
- Slotted
- Product description
- For frame attachment, for installation in enclosures without 482.6 mm (19") accommodation.
- Benefits
- Mounting bolts or mounting rails may be installed on a 25 mm pitch pattern in the enclosure depth.
- Mounting hole for handles provided.
- Applications
- For installation in enclosures without 482.6 mm (19") accommodation
- Material
- Sheet steel
- Surface finish
- Spray-finished
- Colour
- RAL 7035
- Supply includes
- Component shelf, slotted
4 pc(s). fixing bolts - Installation options
- Static installation: Component shelf, 50 kg with fixing bolts on punched section without mounting flange
- Static installation: Component shelf, 100 kg with mounting rails on punched sections without mounting flange
- Depth variable: Component shelf, 50 kg with telescopic slides on punched sections without mounting flange
- Load capacity
- 50 kg area load
- Assembly instruction
- Additionally, two punched sections with mounting flanges are required for the inner mounting level
- Note
- Max. depth of component shelves = Enclosure depth - 100 mm.
- Dimensions
- Width: 671 mm
Height: 29 mm
Depth: 700 mm - To fit
- Enclosure type: VX
VX IT
TS IT
Width: 800 mm - Packs of
- 1 pc(s).
- Net weight
- 5.218 kg
- Gross weight
- 5.94 kg
- PCF per pack (cradle-to-gate)
- 20.9 kg CO2 eq (Cat B)
- Note on PCF category
- Category B: PCF value (cradle-to-gate) based on the product weight, approximately calculated and self-declared
- Customs tariff number
- 94039910
- EAN
- 4028177221390
- ETIM 9
- EC002620
- ECLASS 8.0
- 27189261
- Product description
- DK Component shelf, WHD: 671x29x700 mm, 50 kg, Slotted, For W: 800 mm, RAL 7035
- Documentation
- Additional instructions
- Instructions
Component shelves for 800 mm wide network enclosures
Component shelves made from 1.5 mm sheet steel for use
in 800 mm wide network enclosures. The component shelf
has slots for preventing heat accumulation and can be
loaded up to a maximum of 50 kg. The height of the
fitted component shelves can be adjusted using the 25
mm pitch pattern in network enclosures with a DIN pitch
pattern but is infinitely adjustable in network
enclosures with aluminium frames.
Dimensions (W x D): 671 mm x 700 mm
Material: Sheet steel, RAL 7035
Component shelves made from 1.5 mm sheet steel for use
in 800 mm wide network enclosures. The component shelf
has slots for preventing heat accumulation and can be
loaded up to a maximum of 50 kg. The height of the
fitted component shelves can be adjusted using the 25
mm pitch pattern in network enclosures with a DIN pitch
pattern but is infinitely adjustable in network
enclosures with aluminium frames.
Dimensions (W x D): 671 mm x 700 mm
Material: Sheet steel, RAL 7035