RiLineX connection adaptor

Статья №.: RX 9360210

RiLineX connection adaptor for 60 mm busbar systems. The adaptor boasts an impressive compact design and simple conductor connection. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support through-wiring. Mounted by simply snapping onto the RiLineX board. The supply leads and adaptors are screw-fastened onto the board together. The connection adaptor features a high current-carrying capacity plus high levels of short-circuit protection and universal contact hazard protection that adapts to the relevant wire gauge. The device has a screw fastening, and is suitable for bar widths of between 5 and 10 mm.

Статья №.:
RX 9360210
Преимущества
Mounting on the busbar system and cable connection with just one screw
Материал
Полиамид (PA 6)
Негорючесть согласно UL 94
Цвет
RAL 9005
Rated current (guideline value, IEC)
171 A
Max. rated current of round conductor (IEC)
320 A
Max. rated current of round conductors (UL)
280 A
Указание
The specified rated current as a guideline value is based on the recommended maximum operating current for single-wire cables with an admissible conductor temperature of 70 °C to IEC 61439-1, Table H.1 when laid horizontally in free air, at an ambient temperature of 55 °C.
The specified max. rated current (IEC) describes the recommended max. operating current of the terminal connection with a temperature rise limit of 70K to IEC 61439-1 (Table 6) for conductors laid in free air with clearance. Please note the maximum admissible insulation temperature.
Electrical ratings UL (SCCR)
7,5 кА - 600 В, RMS
100 kA - 600 V, circuit breaker max. 250 A, DIVQ/7
100 kA - 600 V, Fuse Class J max. 200 A, JDDZ/7
Отвод проводов
сверху/снизу
Для шинных систем с межцентровым расстоянием
60 mm
Количество полюсов
3-пол.
Подходит для шинной системы
RiLineX
RiLine60
Размер
Ширина: 63,2 мм
Высота: 239,4 мм
Глубина: 79,2 мм
Подключение проводов
2,5 ‐ 70 мм²
Подходит для шин
12 х 5/10 мм
15 х 5/10 мм
20 x 5/10 мм
30 x 5/10 мм
Rated voltage
800 V AC
800 V DC
600 V AC (UL)
600 V DC (UL)
Степень загрязнения
3
Стандарты
IEC/EN 61439-1
UL 508
Номинальное импульсное напряжение Uimp
8 кВ
Номинальное напряжение изоляции Ui
800 B
Тепловыделение макс.
14 Вт
Степень защиты IP согл. МЭК 60 529
IP 2X
Maximum operating air humidity
90 %
Диапазон рабочих температур
-5 °C...55 °C
Диапазон температур хранения
-25 °C...75 °C
Влажность воздуха (без конденсата)
10...90 %
Fire load
6,963 MJ/m²
Упаковка
4 шт.
Вес нетто
1,776 kg
Gross weight
1,925 kg
PCF per pack (cradle-to-gate)
9,86
Код ТНВЭД
85369010
EAN
4028177997257
ETIM 9
EC001531
Описание продукта
RiLineX connection adaptor for 60 mm busbar systems. The adaptor boasts an impressive compact design and simple conductor connection. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support through-wiring. Mounted by simply snapping onto the RiLineX board. The supply leads and adaptors are screw-fastened onto the board together. The connection adaptor features a high current-carrying capacity plus high levels of short-circuit protection and universal contact hazard protection that adapts to the relevant wire gauge. The device has a screw fastening, and is suitable for bar widths of between 5 and 10 mm.
Допуски
UL + C-UL (listed)
Декларации
PCF-declaration
Декларация о соответствии
Документация
Quick guide
Safety instructions
Руководство