RiLineX connection adaptor

Статья №.: RX 9360220

RiLineX connection adaptor for 60 mm busbar systems. The adaptor boasts an impressive compact design and simple conductor connection. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support through-wiring. Mounted by simply snapping onto the RiLineX board. The supply leads and adaptors are screw-fastened onto the board together. The connection adaptor features a high current-carrying capacity plus high levels of short-circuit protection and universal contact hazard protection that adapts to the relevant wire gauge. The device has a screw fastening, and is suitable for bar widths of between 5 and 10 mm.

Статья №.:
RX 9360220
Преимущества
Mounting on the busbar system and cable connection with just one screw
Материал
Полиамид (PA 6)
Негорючесть согласно UL 94
Цвет
RAL 9005
Rated current (guideline value, IEC)
278 A
Max. rated current of round conductor (IEC)
450 A
Max. rated current of round conductors (UL)
400 A
Max. rated current of laminated copper bar (IEC)
450 A
Max. rated current of laminated copper bar (UL)
400 A
Указание
The specified rated current as a guideline value is based on the recommended maximum operating current for single-wire cables with an admissible conductor temperature of 70 °C to IEC 61439-1, Table H.1 when laid horizontally in free air, at an ambient temperature of 55 °C.
The specified max. rated current (IEC) describes the recommended max. operating current of the terminal connection with a temperature rise limit of 70K to IEC 61439-1 (Table 6) for conductors laid in free air with clearance. Please note the maximum admissible insulation temperature.
Electrical ratings UL (SCCR)
27,5 kA - 600 V, RMS, unprotected
100 kA - 600 V, circuit breaker max. 600 A, DIVQ/7
null
Отвод проводов
сверху/снизу
Для шинных систем с межцентровым расстоянием
60 mm
Количество полюсов
3-пол.
Подходит для шинной системы
RiLineX
RiLine60
Размер
Ширина: 90,5 мм
Высота: 239,4 мм
Глубина: 94,6 мм
Подключение проводов
10 ‐ 150 мм²
Клемма для гибких медных шин при толщине шин 5 мм (Ш x В)
20 мм
Клемма для гибких медных шин при толщине шин 10 мм (Ш x В)
20 мм
Подходит для шин
12 х 5/10 мм
15 х 5/10 мм
20 x 5/10 мм
30 x 5/10 мм
Rated voltage
1 000 V AC
1 500 V DC
600 V AC (UL)
600 V DC (UL)
Степень загрязнения
3
Стандарты
IEC/EN 61439-1
UL 508
Номинальное импульсное напряжение Uimp
12 кВ
Номинальное напряжение изоляции Ui
1 000 B
Тепловыделение макс.
19 Вт
Степень защиты IP согл. МЭК 60 529
IP 2X
Maximum operating air humidity
90 %
Диапазон рабочих температур
-5 °C...55 °C
Диапазон температур хранения
-25 °C...75 °C
Влажность воздуха (без конденсата)
10...90 %
Fire load
9,69 MJ/m²
Упаковка
1 шт.
Вес нетто
0,7 kg
Gross weight
0,815 kg
PCF per pack (cradle-to-gate)
3,87
Код ТНВЭД
85369010
EAN
4028177997240
ETIM 9
EC001531
Описание продукта
RiLineX connection adaptor for 60 mm busbar systems. The adaptor boasts an impressive compact design and simple conductor connection. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support through-wiring. Mounted by simply snapping onto the RiLineX board. The supply leads and adaptors are screw-fastened onto the board together. The connection adaptor features a high current-carrying capacity plus high levels of short-circuit protection and universal contact hazard protection that adapts to the relevant wire gauge. The device has a screw fastening, and is suitable for bar widths of between 5 and 10 mm.
Допуски
UL + C-UL (listed)
Декларации
PCF-declaration
Декларация о соответствии
Документация
Quick guide
Safety instructions
Руководство