RiLineX connection adaptor

Статья №.: RX 9361315

RiLineX connection adaptor for 60 mm busbar systems. The connection adaptor is single-pole and fits a double connection (round/sector-shaped conductor). The phase spacing is freely selectable. The unit is suitable for use with L1/L2/L3/N. The adaptor boasts an impressive compact design. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support full through-wiring. Mounted by simply snapping onto the RiLineX board. The adaptor is readily installed on RiLine60. It offers high levels of short-circuit protection and easy-to-fit contact hazard protection.

Статья №.:
RX 9361315
Преимущества
Mounting on the busbar system and cable connection with just one screw
Материал
Полиамид (PA 6)
Негорючесть согласно UL 94
Цвет
RAL 9005
Rated current (guideline value, IEC)
864 A
Max. rated current of round conductor (IEC)
1 060 A
Max. rated current of round conductors (UL)
980 A
Указание
The specified rated current as a guideline value is based on the recommended maximum operating current for single-wire cables with an admissible conductor temperature of 70 °C to IEC 61439-1, Table H.1 when laid horizontally in free air, at an ambient temperature of 55 °C.
The specified max. rated current (IEC) describes the recommended max. operating current of the terminal connection with a temperature rise limit of 70K to IEC 61439-1 (Table 6) for conductors laid in free air with clearance. Please note the maximum admissible insulation temperature.
Electrical ratings UL (SCCR)
27,5 kA - 600 V, RMS, unprotected
100 kA - 600 V, circuit breaker max. 600 A, DIVQ/7
100 kA - 600 V, Fuse Class L max. 2000 A, JDDZ/7
Отвод проводов
сверху/снизу
Для шинных систем с межцентровым расстоянием
60 mm
Количество полюсов
1-пол.
Подходит для шинной системы
RiLineX
RiLine60
Размер
Ширина: 54,1 мм
Высота: 119,4 мм
Глубина: 163,4 мм
Подключение проводов
95 ‐ 300 мм²
Подходит для шин
15 x 10 мм
20 x 10 мм
30 x 10 мм
Rated voltage
1 000 V AC
1 500 V DC
600 V AC (UL)
600 V DC (UL)
Степень загрязнения
3
Стандарты
IEC/EN 61439-1
UL 508
Номинальное импульсное напряжение Uimp
12 кВ
Номинальное напряжение изоляции Ui
1 000 B
Тепловыделение макс.
105 Вт
Степень защиты IP согл. МЭК 60 529
IP 2X
Maximum operating air humidity
90 %
Диапазон рабочих температур
-5 °C...55 °C
Диапазон температур хранения
-25 °C...75 °C
Влажность воздуха (без конденсата)
10...90 %
Кол-во подключений
2
Fire load
5,947 MJ/m²
Упаковка
1 шт.
Вес нетто
0,8 kg
Gross weight
0,892 kg
PCF per pack (cradle-to-gate)
4,47
Код ТНВЭД
85369010
ETIM 9
EC001531
Описание продукта
RiLineX connection adaptor for 60 mm busbar systems. The connection adaptor is single-pole and fits a double connection (round/sector-shaped conductor). The phase spacing is freely selectable. The unit is suitable for use with L1/L2/L3/N. The adaptor boasts an impressive compact design. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support full through-wiring. Mounted by simply snapping onto the RiLineX board. The adaptor is readily installed on RiLine60. It offers high levels of short-circuit protection and easy-to-fit contact hazard protection.
Допуски
UL + C-UL (listed)
Декларации
PCF-declaration
Декларация о соответствии
Документация
Quick guide
Safety instructions
Руководство