Mounting frame, 482.6 mm (19") for TS, TS IT
Model No. DK 5501.285
For the installation of the front and rear 482.6 mm (19˝) levels, the welded 482.6 mm (19˝) mounting frame may be attached with complete depth variability.
+ Product description
Firmly linked 482.6mm (19") mounting frame for integration of a 482.6 mm (19") mounting level within a TS frame structure. Profiles analogous to TS IT for complete system compatibility, incl. tool-free assembly. Depth-variable mounting between the roof and base frames. Individual height units bi-directionally numbered. Mounting frame at the front, prepared for the integration of cable management and Dynamic Rack Control (RFID), mounting frame at the rear for space-saving integration of the PDU busbar, in the Zero-U space on both sides.
The outer mounting level of the enclosure frame is left free for other installed equipment. All-round compartmentalisation with air baffle plates is supported.
Enclosure type: TS
Enclosure type: TS IT
Width: 600 mm
Height: 2200 mm
Up to 15,000 N static load, with even load distribution on two 482.6 mm (19") mounting frames, fully configured.
|Customs tariff number:||
DK Mounting frame, 482.6 mm (19"), For WxH: 600x2200 mm, Rear, RAL 9005
+ Add accessories
– Customers who interested in this item also interested in
Flex-Block trim panels, 100 mm, with brush strip for Flex-Block corner pieces
Model No.8100.605Module plates for TE
Model No.7526.760Module plates for TE
Model No.7526.750CMC III CAN bus connection cable
Model No.7030.490Roof plate for cable entry glands for VX, VX IT
Model No.9681.568Module plates for TE
Model No.7526.770Identification strip
Model No.2404.000Cable support hinged, with anti-kink device and clamp
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.