- Št. artikla:
- RX 9360241
- Benefits
- Mounting on the busbar system and cable connection with just one screw
- Vertical variant for side infeed to the board
- Material
- Polyamide (PA 6)
Fire protection corresponding to UL 94 - Colour
- RAL 35745
- Rated current (guideline value, IEC)
- 432 A
- Max. rated current of round conductor (IEC)
- 710 A
- Max. rated current of round conductors (UL)
- 630 A
- Max. rated current of laminated copper bar (IEC)
- 950 A
- Max. rated current of laminated copper bar (UL)
- 910 A
- Note
- The specified rated current as a guideline value is based on the recommended maximum operating current for single-wire cables with an admissible conductor temperature of 70 °C to IEC 61439-1, Table H.1 when laid horizontally in free air, at an ambient temperature of 55 °C.
- The specified max. rated current (IEC) describes the recommended max. operating current of the terminal connection with a temperature rise limit of 70K to IEC 61439-1 (Table 6) for conductors laid in free air with clearance. Please note the maximum admissible insulation temperature.
- Electrical ratings UL (SCCR)
- 27,5 kA - 600 V, RMS, unprotected
- 100 kA - 480 V, circuit breaker max. 800 A, DIVQ/7
- 100 kA - 600 V, Fuse Class L max. 1200 A, JDDZ/7
- Cable outlet
- In an axial direction to the board
- For bar systems with centre-to-centre spacing
- 60 mm
- Number of poles
- 3-pole
- To fit busbar system
- RiLineX
- RiLine60
- Dimensions
- Width: 57.8 mm
Height: 239.4 mm
Depth: 135.6 mm - Connection of round conductors
- 150 ‐ 300 mm²
- Clamping area for laminated copper bars (W x H)
- 32 x 20 mm
- To fit busbars
- 15 x 5/10 mm
- 20 x 5/10 mm
- 30 x 5/10 mm
- Rated voltage
- 1.000 V AC
1.500 V DC
600 V AC (UL)
600 V DC (UL) - Contamination level
- 3
- Standards
- IEC/EN 61439-1
- UL 508
- Rated impulse withstand voltage Uimp
- 12 kV
- Rated insulation voltage Ui
- 1.000 V
- Heat loss max.
- 50 W
- IP protection category to IEC 60 529
- IP 2X
- Maximum operating air humidity
- 90 %
- Operating temperature range
- -5 °C...55 °C
- Storage temperature range
- -25 °C...75 °C
- Ambient humidity (non-condensing)
- 10...90 %
- Fire load
- 10,554 MJ/m²
- Packs of
- 1 pc(s).
- Net weight
- 1 kg
- Gross weight
- 1,185 kg
- PCF per pack (cradle-to-gate)
- 5.51
- Customs tariff number
- 85369010
- EAN
- 4028177997202
- ETIM 9
- EC001531
- Product description
- RiLineX connection adaptor for side infeed from the left or right. For use with vertical mounting of the board or as a corner connector using laminated connection straps. It is also ideal as a T-connection between horizontal and vertical systems. It must not be used with other busbar systems such as RiLine60.
- Dokumentacija
- Instructions
- Quick guide
- Safety instructions
RiLineX connection adaptor (710 A)
RiLineX connection adaptor for 60 mm
busbar systems. The device has screw fastening
for simultaneous contact between the rail and conductor.
For voltages up to 1000 V AC and 1500 V DC.
IEC and UL approved.
Product information
Number of poles: 3
Busbar dimensions: 15/20/30 mm x 5/10 mm
Rated current max.: 710 A
Connection: max. 300 mm²
Cable outlet: horizontal/vertikal
Dimensions: 60 mm x 240 mm x 130 mm (WxHxD)
Manufacturer: Rittal GmbH & Co. KG
Type: 9360241
RiLineX connection adaptor for 60 mm
busbar systems. The device has screw fastening
for simultaneous contact between the rail and conductor.
For voltages up to 1000 V AC and 1500 V DC.
IEC and UL approved.
Product information
Number of poles: 3
Busbar dimensions: 15/20/30 mm x 5/10 mm
Rated current max.: 710 A
Connection: max. 300 mm²
Cable outlet: horizontal/vertikal
Dimensions: 60 mm x 240 mm x 130 mm (WxHxD)
Manufacturer: Rittal GmbH & Co. KG
Type: 9360241