Discontinued article.
Information on the discontinued articles
This item will be discontinued on 30.01.2016
This item is being replaced by 7888520
Network rack TE 8000
This item is being replaced by 7888520
Network rack TE 8000
Close
More on the product
Create PDF of this page+ Product description
| Benefits: |
No frame structure Optimum accessibility Readily dismantled and therefore easily installed |
|---|---|
| Material: |
Sheet steel Glazed door: Single-pane safety glass, 4 mm |
| Surface finish: |
Mounting frame: Dipcoat-primed Enclosure panels: Powder-coated |
| Colour: | RAL 7035 |
| Supply includes: |
Self-supporting 482.6 mm (19") mounting frames, front and rear, depth-variable Glazed door at the front, incl. 130° hinge, recessed handle and security lock 3524 E Sheet steel door at the rear, including 130° hinge, security lock 3524 E Side panels, lockable, including security lock 3524 E Base frame with maximum cut-out (for optional population with module plates) Roof plate including brush strip for cable entry and concealed cut-out for optional fan. Levelling feet, M10 (supplied loose) Spacers, 20 mm (supplied loose) to raise the roof |
| Dimensions: |
Width: 800 mm Height: 2,000 mm Depth: 600 mm |
| Units: | 42 U |
| Distance between levels as delivered: | 495 mm |
| Basic material: | Sheet steel |
| Packs of: | 1 pc(s). |
| Weight/pack: | 113,2 kg |
| EAN: | 4028177426801 |
| ETIM 7.0: | EC002499 |
| ECLASS 8.0: | 27180207 |
| Product description: | TE Network enclosure TE 7000, WHD: 800x2000x600 mm, With glazed door |
+ Downloads / CAD
| Documentation: |
Instructions:
DA, DE, EN, ES, FR, IT, NL
|
|---|
+ Add accessories
+ Tender texts
Network enclosure TE 7000
Screw-fastened, dismantling enclosure construction based on a
self-supporting 482.6 mm (19.) mounting profile which also acts as the
enclosure frame.
Modular roof and bottom frame connected to a supporting rack via
imperial mounting frames. Plug-type, lockable side panels including
security lock 3524E.
Glazed door at the front, with 4 mm safety glass, sheet steel door at
the rear. Both including two-point locking rod, handle tray, safety lock
3524E, may be replaced by an Ergofrom-S handle for optionally
integrating a semi-cylinder. Door hinges may be swapped, door opening
angle 130°. Roof plate with integral brush strip, fan unit ready for
connection including thermostat control may be retrofitted optionally.
Interior installation is via two depth-adjustable 482.6 mm (19.)
mounting frames with integral 25 mm system holes. The distance between
the 482.6 (19.) angles is freely selectable.
Maximum load capacity of one mounting level is 200 kg, i.e. max. 400 kg
for each rack.
The enclosure is bayable. A base/plinth may be mounted optionally.
Supply includes: enclosure including levelling feet and spacers for
raising the roof.
Material: sheet steel
Surface finish: powder-coated in RAL 7035
Dimensions: WxHxD: 800x2000x600 mm
Available mounting height: 42 U
Protection category: IP 20
Screw-fastened, dismantling enclosure construction based on a
self-supporting 482.6 mm (19.) mounting profile which also acts as the
enclosure frame.
Modular roof and bottom frame connected to a supporting rack via
imperial mounting frames. Plug-type, lockable side panels including
security lock 3524E.
Glazed door at the front, with 4 mm safety glass, sheet steel door at
the rear. Both including two-point locking rod, handle tray, safety lock
3524E, may be replaced by an Ergofrom-S handle for optionally
integrating a semi-cylinder. Door hinges may be swapped, door opening
angle 130°. Roof plate with integral brush strip, fan unit ready for
connection including thermostat control may be retrofitted optionally.
Interior installation is via two depth-adjustable 482.6 mm (19.)
mounting frames with integral 25 mm system holes. The distance between
the 482.6 (19.) angles is freely selectable.
Maximum load capacity of one mounting level is 200 kg, i.e. max. 400 kg
for each rack.
The enclosure is bayable. A base/plinth may be mounted optionally.
Supply includes: enclosure including levelling feet and spacers for
raising the roof.
Material: sheet steel
Surface finish: powder-coated in RAL 7035
Dimensions: WxHxD: 800x2000x600 mm
Available mounting height: 42 U
Protection category: IP 20
