Cross member for VX, TS, SE, CM, TP, PC, IW, Blue e+ chiller
Model No. TS 8601.450
To increase stability, the cross members project 138 mm beyond the enclosure base frame at the front and rear.
+ Product description
To increase stability, the cross member protrudes 138 mm above and below the base frame of the enclosure at the front and rear. For deeper enclosures, the rear part may be extended and screw-fastened again. For screw-fastening to the floor and enclosure with mounting hole at the sides, front and rear. The castors and leveling feet may be secured to the welded nuts M12.
To increase stability
Adjustable to the housing depth
1 cross beam, left
1 cross beam, right
Ensure sufficient stability to prevent the enclosure from tipping over!
Enclosure type: VX
Enclosure type: TS
Enclosure type: VX SE
Enclosure type: TP
Enclosure type: PC
Enclosure type: IW
Depth: 400 mm (16 ")
Depth: 500 mm (20 ")
Height: 70 mm (2.8 ")
For screw-fastening to base and enclosure with side, front and rear mounting holes
For Blue e+ chillers, the cross-beam can be used as a base/plinth component
7.9 kg (17.4 lb.)
|Customs tariff number:||
TS Cross member, for TS, SE, CM, TP, PC, IW, for D: 400/500 mm