Accessories

EMC

The level of protection of a standard enclosure against electrical, magnetic and electromagnetic fields can be further increased with the system accessories. Measures include improving the shielding effect with optimum potential equalization or placing the contacts for cable shields as close to the cable entry point as possible.

EMC

EMC Shielding Bracket

Quick tool-free assembly Press the EMC shielding bracket against the cable shield and clip into the rail, diameter changes are compensated in full by the spring.

EMC

Rail for EMC shielding bracket and strain relief

Combined rails for strain relief and EMC contacting of inserted cables.

EMC

EMC shielding seal for VX

For EMC-compliant shielding of the baying point in conjunction with external baying connector.

EMC

EMC Base Plate for VX

For shielded cables with max. 20 mm diameter. Combined EMC contacting and cable fixation provide low-impedance contact between the cable shield and the base plate. For all 400, 500, 600 and 800 mm deep enclosures, in combination with standard base plates.

EMC

Contact Cutter

Enables EMC-compatible preparation of the contact point e.g. for grounding braids.

EMC

Contact Paint

Prevents the corrosion of conductive, unprotected contact points.

EMC

EMC Base Plate

For shielded cables with max. 20 mm diameter in combination with standard base plates.

EMC

EMC divider panel seal for VX

With bayed EMC enclosure systems and when using a zinc-plated divider panel, this seal ensures optimum contact and shield attenuation.