Profil za uvođenje kabela, srednji
Model No. VX 8618.800
The section is fitted directly onto the gland plates. In this way, when installing the mounting plate in the forward mounting position, the cables may be routed directly onto a cable clamp rail without large bending radii. In conjunction with the cable clamp rail, this enables optimum adjustment between the cable entry and mounting plate.
More on the productCreate PDF of this page
+ Product description
High level of sealing of cables inserted into the enclosure
For top-mounting on gland plates.
Extruded aluminium section
Seal: PU foam
Cross-section: 30 x 25 mm
|Protection category IP to IEC 60 529:||
IP 55 if installed correctly
Plug-in sections, incl. foam rubber clamp strip
You will need two pieces per cable entry point.
From an enclosure width of 1000 mm, the base assembly is divided into two sections in the width. Two cable entry points (left/right) may be used.
Enclosure type: VX
Enclosure type: SE
Width: = 600 mm
|Customs tariff number:||
VX Section for cable entry, centre, for W: 600 mm