Model No. TS 8800.350
Used on enclosures and rails with rectangular system punching 12.5 x 10.5 mm. The nuts are inserted from the same side as screw-fastening takes place.
+ Product description
The nuts are inserted from the same side as screw-fastening takes place. Consequently, attachment points in the same height or width may also be used around corners. The spring cage also ensures electrical connection in the system punchings.
On enclosures and rails with rectangular system punching 12.5 x 10.5 mm.
Vertical TS, SE enclosure section via adaptor rails for PS compatibility
TS horizontal, direct
On the horizontal SE enclosure section, bottom, directly
On the horizontal SE enclosure section, (only top in the depth), directly
Punched rails 23 x 23 mm
Punched section without mounting flange, 23 x 73 mm
Punched section without mounting flange, 45 x 88 mm
Punched section with mounting flange, 23 x 73 mm
|Customs tariff number:||
TS Captive nut, for thread M8, for insertion from the front
– Customers who interested in this item also interested in
Cable duct for vertical TS section
Model No.8800.570Server telescopic slides
Model No.3659.180PSM busbars
Model No.7856.006Swing frame, large for VX, 600, 800 and 1200 mm wide enclosures
Model No.8619.024Mounting plate for CS New Basic enclosure
Model No.9765.095Component shelf for frame attachment Enclosure width 600 and 800 mm
Model No.7165.035Adhesive measurement strip, 482.6 mm (19")
Model No.7950.100Baying systems TS 8 Electronic enclosure
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.