- Obj. č.:
- RX 9361315
- Výhody
- Mounting on the busbar system and cable connection with just one screw
- Materiál
- Polyamid (PA 6)
Ochrana proti požiaru zodpovedá UL 94 - Farba
- RAL 9005
- Menovitý prúd (max.)
- 864 A
- Menovitý prúd max.
- 1 060 A
- Rated current of round conductor
- 1 060 A
- Rated current of round conductor (UL)
- 980 A
- Elektrické parametre UL (SCCR)
- 27,5 kA - 600 V, RMS, unprotected
- 100 kA - 600 V, circuit breaker max. 600 A, DIVQ/7
- 100 kA - 600 V, Fuse Class L max. 2000 A, JDDZ/7
- Vývod vodičov
- Top/bottom
- Pre prípojnicové systémy s rozstupom
- 60 mm
- Počet pólov
- Single-pole
- Vhodné pre prípojnicový systém
- RiLineX
- RiLine60
- Rozmery
- Šírka: 54,1 mm
Výška: 119,4 mm
Hĺbka: 163,4 mm - Pripojenie okrúhlych vodičov
- 95 ‐ 300 mm²
- Vhodné pre prípojnice
- 15 x 10 mm
- 20 x 10 mm
- 30 x 10 mm
- Rated voltage
- 1 000 V AC
1 500 V DC
600 V AC (UL)
600 V DC (UL) - Trieda prepätia
- 4
- Stupeň znečistenia
- 3
- Normy
- IEC/EN 61439-1
- UL 508
- Menovité rázové napätie Uimp
- 12 kV
- Rated insulation voltage Ui
- 1 000 V
- Stratový výkon max.
- 105 W
- Stupeň krytia IP podľa normy IEC 60 529
- IP 2X
- Maximum operating air humidity
- 90 %
- Rozsah prevádzkových teplôt
- -5 °C...55 °C
- Rozsah skladovacích teplôt
- -25 °C...75 °C
- Vlhkosť vzduchu (nekondenzujúca)
- 10...90 %
- Počet prípojok
- 2
- Balenie
- 1 pc(s).
- Netto hmotnosť
- 0,8 kg
- Brutto hmotnosť
- 0,892 kg
- PCF per pack (cradle-to-gate)
- 4,47
- Číslo colnej sadzby
- 85369010
- ETIM 9
- EC001531
- Popis výrobku
- RiLineX connection adaptor for 60 mm busbar systems. The connection adaptor is single-pole and fits a double connection (round/sector-shaped conductor). The phase spacing is freely selectable. The unit is suitable for use with L1/L2/L3/N. The adaptor boasts an impressive compact design. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support full through-wiring. Mounted by simply snapping onto the RiLineX board. The adaptor is readily installed on RiLine60. It offers high levels of short-circuit protection and easy-to-fit contact hazard protection.
RiLineX connection adaptor
Obj. č.: RX 9361315
RiLineX connection adaptor for 60 mm busbar systems. The connection adaptor is single-pole and fits a double connection (round/sector-shaped conductor). The phase spacing is freely selectable. The unit is suitable for use with L1/L2/L3/N. The adaptor boasts an impressive compact design. Dismantling requires the use of tools. Conductors may be connected either from above or below. The connection clamps support full through-wiring. Mounted by simply snapping onto the RiLineX board. The adaptor is readily installed on RiLine60. It offers high levels of short-circuit protection and easy-to-fit contact hazard protection.