Enclosure heater without fan
Model No. SK 3105.350
Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits. Version without fan. Continuous thermal output 10 – 150 W.
+ Product description
Enclosure heaters to regulate relative humidity, prevent temperatures from dropping below the dew point and stop condensation forming inside the enclosure. This prevents consequential damage associated with corrosion or electrical short circuits.
|Protection category IP to IEC 60 529:||
A thermostat is recommended for precise temperature control inside the enclosure.
In order to prevent condensation on assemblies, a hygrostat is recommended to regulate heating
In larger enclosures, even heat distribution is best achieved by installing several low-output heaters.
|Note on Model No.:||
Special voltages available on request. We reserve the right to make technical modifications.
|Continuous thermal output at 10 °C:||
63 W - 75 W
|Rated operating voltage:||
110 V - 240 V, 1~, 50 Hz/60 Hz
Width: 64 mm
Height: 230 mm
Depth: 56 mm
|Customs tariff number:||
SK enclosure heater, without fan, 63-75 W, 110-240 V, 1~, 50/60 Hz, WHD: 64 x 230 x 56 mm
+ Add accessories
– Customers who were interested in this item were also interested in
Bottom-mounted adaptor for enclosure internal thermostat and hygrostat
Model No.3110.200Cable duct
Model No.8800.750Cable conduit
Product data (ZIP)
Rittal does not assume any liability for the topicality of the data downloaded locally on your device.