4051194 Wire Terminal WT L fully automated wire processing machine

Вижте тази страница като PDF

Член №.:: AS 4051194
Design: Wire Terminal WT L10 B (wire chain bundler)
Product description: The Wire Terminal WT L10 B fully automated wire processing machine can process wire cross-sections ranging from 0.5–6 mm². This includes length-cutting, insulation-stripping, crimping and project-specific labelling of the wires. The finished wires are output in chain bundles on an order-specific basis. Alternatively, the wire output is also available as an ejection system.
Benefits: Boost efficiency with the option of production in sorted chain bundles; The bundled batch may be removed during active production; Simplifies the wiring process with step-by-step instructions in Eplan Smart Wiring; Supports the wiring process at various locations
Technical specifications: 10 wire end ferrule infeeds via feeder bowls; Crimping range 0.5 mm²: Crimping length 8 mm (0.31 in.) and 10 mm (0.39 in.); Crimping range 0.75 mm²: Crimping length 8 mm (0.31 in.), 10 mm (0.39 in.) and 12 mm (0.47 in.); Crimping range 1 mm²: Crimping length 8 mm (0.31 in.), 10 mm (0.39 in.) and 12 mm (0.47 in.); Crimping range 1.5 mm²: Crimping length 8 mm (0.31 in.), 10 mm (0.39 in.), 12 mm (0.47 in.) und 18 mm (0.71 in.); Crimping range 2.5 mm²: Crimping length 8 mm (0.31 in.), 12 mm (0.47 in.) and 18 mm (0.71 in.); Crimping range 4 mm²: Crimping length 10 mm (0.39 in.), 12 mm (0.47 in.) and 18 mm (0.71 in.); Crimping range 6 mm²: Crimping length 12 mm (0.47 in.) and 18 mm (0.71 in.); The Wire Terminal WT L can process wire lengths from 150 mm to 10 m; The WT L Wire Terminal can accommodate one wire infeed block.; Wire output as chain bundle
Supply includes: Machine frame and encapsulation
Operating unit
1 x WT 16 vibratory bowl feeder for 0.5 mm²
3 x WT 20 vibratory bowl feeders for 0.75/1.0 mm²
3 x WT 29 vibratory bowl feeders for 1.5/2.5 mm²
3 x WT 43 vibratory bowl feeders for 4.0/6.0 mm²
Chain bundle module WT
10 reels of WT bundle tape, 50 m each
Machinable material: Fine-wire copper cables to EN 60228 / VDE 0295 Category 5; Wire end ferrules with plastic collar to DIN 46228-4 and Multinorm
Note: Please talk to your Rittal sales consultant about a bespoke machine configuration.; German and English are included as standard with the Wire Terminal; The vibratory bowl feeders and the separation of single wire end ferrules are designed for the dimensional tolerances of Rittal wire end ferrules to DIN 46228-4:2019-02. If the wire end ferrules used exceed the defined dimension tolerances, it may be necessary to design/test a new bowl feeder and to adapt the wire end ferrule separation.; We reserve the right to make technical modifications
Machine options: Wire store WT Tube 12 (4051.218); WT printer IQ.JET, black 4051281; WT printer IQ.JET, white 4051280
Interfaces: Eplan Pro Panel; Eplan Smart Wiring
Compressed air supply min.: 5,5 bar
Compressed air supply max.: 6 bar
Rated operating voltage: 230 V, 1~, 50 Hz/60 Hz
Control voltage (DC): 24 V
Power consumption (approx.): 1 kW
Cycle time: 11 s
Wires per hour approx.: 320
Support area: Width: 2,170 mm
Height: 1,870 mm
Depth: 1,080 mm
Customs tariff number: 84633000
ETIM 8: EC000000
ECLASS 8.0: 18129090
Product description: Wire Terminal WT L10 W fully automated wire processing machine (wire chain bundler)

Wire Terminal WT L fully automated wire processing machine

Член №.: AS 4051194